Want this question answered?
You don't. Just and fluid and it will go off.
Should reset when fluid added--may be defective sensor in reservoir
You fill the tank with fluid and it shuts off. There's no resetting.
If the sensor is functioning properly, when you add the washer fluid the light should turn off automatically; no additional action required.
There is a magnetic float inside the washer fluid tank that causes a magnetic sensor on the outside of the tank to activate when the fluid is low. Either the sensor is bad or the float is stuck.
Assuming you mean the low windshield washer fluid indicator, by just filling the reservoir with windshield washer fluid, the light should turn off. If not, the low washer fluid sensor may be faulty.
Just went thru this problem.... the line goes thru the left front fender and has come loose from the line where the motor is. Just push line back into rubber splice under the bumper and good to go. Have fun Matt
You fill the washer fluid reservoir.
Should reset itself when fluid is added unless sensor is bad
There is no reset. Either the fluid is low, or there is a level sensor malfunction.
Have Auto Parts Store reset it , will do this for free.
Add brake fluid