Want this question answered?
hold the reset button until it pops up
I have a Acura Integra LS 1995 with an Acura Stereo, I have the Code but I can Not reset it , what are the steps to reset it? please help me ...
There should be a acura business card in the owners manual that has a reset code
the easiest way to do this is by disconnecting the battery for about 3 minutes and connect it back. Make sure you have the radio code before doing this because after the radio resets it will ask for the code. This method will also reset the GPS in the car and the GPS will also ask for the code to turn on.
try disconnecting the battery for an hour
After repairing the cause of the code, you reset it with a scan tool.
wat does b125 mean on a acura rl
You have to call the acura dealer and give them your vin number and they will give u the code every car has a diffrent code
It should be a 5 digit code (you have to call an acura dealer with the serial number) just press the digits and it will unlock. Hint... if you've entered the wrong code you may have to remove power to reset it.
Radio codes of Acura Tl vehicles are part of a standard anti-theft system. To the reset the system just unplug the battery from the car for at least five seconds.
i just went to the acura dealer today to have my radio reset from the error code displayed after my radio was disconnected from the power. they looked inside the glove box on the side and found the five digit code that must be entered to reset the radio. otherwise you must remove the radio and look on the back for the serial number and then your acura dealer can find the five digit code in the computer system. (this was going to cost me $100 an hour for the acura labor charge!!) check your glove box. The code I have is 62612.....I hope that works for you
Stereo codes are unique to each stereo and you will have to get the serial number from the stereo and call an Acura dealer for the code.