You changed the battery on a 2004 Acura MDX need to reset the radio?
There should be a acura business card in the owners manual that has a reset code
After replacing the battery in a Chevrolet Aveo how do you get the radio and clock to begin working again?
the easiest way to do this is by disconnecting the battery for about 3 minutes and connect it back. Make sure you have the radio code before doing this because after the radio resets it will ask for the code. This method will also reset the GPS in the car and the GPS will also ask for the code to turn on.
i just went to the acura dealer today to have my radio reset from the error code displayed after my radio was disconnected from the power. they looked inside the glove box on the side and found the five digit code that must be entered to reset the radio. otherwise you must remove the radio and look on the back for the serial number and then your acura dealer can find the five digit code…
Can you replace car battery in 2000 BMW z3 with like battery and just have to reset radio will this mess with the engine computer?
To reset the transmission light just disconnect the battery for a couple minutes then reconnect the battery. Warning if you have a factory radio you will need the radio code to use the radio after you do this. You can find the code on the glove box. Open the glove box and look on the outside left hand side. The five digit code is on a white sticker. If your transmission light comes back on…
By changing the battery, you erased your car's computer presets. Your car probably has an anti-theft radio, that locks when power is lost to it, and requires a factory security code to unlock it. The code might be in a section of the owner's manual, but if you cannot find it, you have to go to a new car dealership and have them reset the radio.