Want this question answered?
does a 2004 Nissan quest have a fuel reset switch
The Trip Odometer is normally reset by pushing and holding the reset button in. The odometer can not be reset.
How does one reset service engine light on 2000 Nissan Quest Thanks Bill
You cannot reset the odometer in your car, however you can reset your trip odometer.
It's in the owners manual. Turn the key to the "on" position with the odometer reading showing. Hold the trip reset button in for five seconds or more. When 0000000000 shows, release the button. The current odometer reading should show.
It's in the owners manual. Turn the key to the "on" position with the odometer reading showing. Hold the trip reset button in for five seconds or more. When 0000000000 shows, release the button. The current odometer reading should show.
You can not reset the odometer. The trip meter can be reset by holding down the button.
Where is trip odometer reset button on vauxhall insignia
Make sure the total odometer reading is dispalyed, then turn the car off (no power). Press and hold the odometer reset switch (next to the odometer) while turning the key to the accessories position. The odometer reading is replaced by 5 dashed lines which will disappear at the rate of approx. 1 per second. When this is finished, the original odometer reading will be displayed and the maintenance light should be extinguished for another 5000 miles. This procedure is also listed in the Sienna owners manual. Hope this helps.
The trip opometer can be reset and doesn't change the odometer. The trip opometer can be reset and doesn't change the odometer. An odometer is a continual counter of distance and a trip odometer measures from point A to B and can be reset.
This should work to reset your light if your trip and odometer reading are digital. If they are analog, sorry don't know how to reset. I don't know if it is illegal, it is there for you as a reminder to maintain your car, it is for your use only. But it should not be that hard to reset it yourself. We have a Tundra that the 'maint needed' light comes on. It is programmed to come on every 5000 miles as a reminder. This is how we reset ours: 1. Turn key to accessory port only (where everything comes on, but the engine does not) 2. Push reset button to change from the 'trip meter' to your odometer reading. Press and HOLD the button while odometer reading is diplayed. DON'T LET GO OF THE RESET BUTTON. 3. Turn key off while STILL HOLDING THE RESET BUTTON. 4. Turn key back on to the accessory port again WHILE STILL HOLDING THE RESET BUTTON. The odometer reading should change to a 00000000 or ----------. 5. You are now done. The light will come back on in 5000 miles again to remind you to change oil and ?????
With odometer reading selected (not trip A or B) turn key to LOCK and remove key (not sure if this is necessary) insert key, hold down odometer button while you turn key to ON position. Continue to hold down odometer button. Odometer display will show ------ then blank, your Maintenance Required light will turn off and your old odometer reading will return.