0
How do you reset the power windows on LR2 after battery failure?
Wiki User
∙ 12y ago
The directions are in your manual. Roll the window down, roll the window up, release the button then hold it up for two seconds, roll the window down, release the button then hold it down for two seconds. Repeat that for each window.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
Why don't my power windows work on my 2006 Mazda 6 after changing the battery?
you have to reset the computer.
How do you reset electric windows on a peugeot 307?
To reset electric windows on a Peugeot 307, just disconnect the battery for a while. Following the battery disconnect, neither of the electric windows will operate.
How do you reset power window switch on 1998 Mercedes c230?
There is a reset instruction in the owner manual at the end of the section on power windows. Essentially, you need to put the windows down and then move them up by partially pressing the switch without engaging the express feature. When the window reaches the top, hold the switch in position for an additional two (2) seconds and then do the same for all of the windows. Voila----the express feature will work again. The Power roof may also need to be reset after losing power because of a battery change or other maintenance where the battery needs to be disconnected.
Where is the reset switch for the power windows on a 2001 Chrysler Sebring?
A Chrysler Sebring does not have any reset switches.
How do you fix 4 of 4 power windows in 2002 ford explorer that don't work?
In the power distribution box, in the engine compartment,WHICH IS LIVE - DISCONNECT YOUR NEGATIVE BATTERY CABLE - there is a 30 amp circuit breaker for the 4 power windows ( at least on the 4 door there is ) The circuit breaker is supposed to reset itself, but some breakers need to be reset manually or replaced when they malfunction. It is in location # 62.
How do you reset rsx radio?
take off the power wire from the battery.
How do you reset the computer on the2005 ford explorer limited?
All you have to do is disconnect the battery for five minutes to let the power drain and the computer will be reset when you reconnect the battery.
What is the procedure to reset the Malfunction Indicator on a 2004 Chrysler Town and Country?
You can reset the check engine light with a scan tool or by unhooking the battery. If the failure is not repaired the light will return.
How do you reset the computer codes on a 1994 chrysler lebaron?
The ideal way is to read them with a scan tool, fix the problem , and then reset them with the scan tool. Failing that you can unhook the battery and reset the codes until the failure reoccurs.
How do you reset a PC that will not turn on?
That's vague. I'll try to answer several possibilities. if it would not turn on, and you removed the battery, and you pressed reset, and then reinserted the battery, and attached the battery charger/power adapter, and the AC power light comes on, and then you pressed power, and it still won't come on, and you also tried to power on without the battery installed, running on just the charger/ adapter, *then, your laptop has a serious problem.
Why doesnt brake lamp failure lamp on dash of 94 Honda Accord not reset after bulb replacement?
Remove the negative battery terminal (-) for about 15 minutes and most codes will reset.
How do you reset dodge charger battery?
Reset a battery? There is no such thing as resetting a battery.
