Want this question answered?
Service indicator reset switch ignition to position 2 press brake & accelerator pedals together for 15 seconds service indicator will flash when reset release pedals turn ignition off hope this was useful Mike 2
You get it serviced at an authorized garage, they will have the equipment to read the diagnostic, fix what your car is complaining about and reset the spanner light.
The transit brake warning light, on a Ford, can be reset by changing the brake pads. If the warning light is still on after changing the brake pads remove the fuse for 10 seconds.
The transit brake warning light, on a Ford, can be reset by changing the brake pads. If the warning light is still on after changing the brake pads remove the fuse for 10 seconds.
to get the spanner (or service me now) light off all you have to do is turn the ignition on while the engine is off and hold in the trip meter reset button for six seconds or so.
Car due a service? It will need to be reset by a main dealer
this means that's its due a service , if you press and hold the odometer (trip) button on your dash then turn ignition on you should get a countdown from 10 to 0 then the service light will be reset, and............... the spanner has gone!!!!!
Put key in ignition then push down on the mileage reset and hold it down then whilst holding it down turn ignition round till only ignition lights come on. The spanner or service light will either start flashing or do a count down when it stops that's it reset for its next service in miles then turn ignition off and release the mileage trip. Start engine and light should be off as its reset. I have just saved you money from going to a dealership.
J3 chery how do you reset service spanner
The airbag light can be reset by connecting an ODBII reader. However the light is on because of a problem with the airbag system. The system needs to be checked to insure that the airbag works properly.
its quite simple to reset this light (turn on ignition,press foot brake and accelerator at the same time until the light starts flashing then turn off ignition and it should be reset.
If the service light is in the shape if a spanner then I presume it is like the 2008 model. In which case press and hold the trip button "0.0" before inserting the key. Insert ignition key while holding down the trip button and turn on ignition without starting car. Release the trip button and the service light spanner will cease to flash. Now turn the trip button to the right (clockwise) and it will reset. Service light (spanner) should disappear and only return when the next service is due!