I had a similar problem with a Gateway FX-6800-01e running Windows Vista, except on my machine Alt+F10 does not work, but F8 does. The following is the procedure I used. (I based this procedure on information in the Windows 7 Resource Kit, so it probably works for that operating system as well.) There has to be an intact recovery partition on the hard disk in order for this to work.
No guarantees, but this is what worked for me. DO NOT DO THIS UNLESS YOU ARE WILLING TO DESTROY ALL THE DATA ON YOUR HARD DISK, OR YOU ARE SURE THE DATA IS ALREADY DESTROYED!
In the following procedure, when I say to enter something, I mean type the text between the quotation marks and then press Enter. (Do not enter the quotation marks.)
1. While the system is going through the boot process, press F8 repeatedly until Advanced Boot Options comes up.
2. Choose Repair Your Computer.
3. Log in using a user name other than Administrator.
4. Select Command Prompt.
5. Type "diskpart" and press Enter.
6. Enter "list disk" to display a list of disk drives.
7. Enter "select disk <x>", where <x> is the number of the disk drive that has the recovery partition.
8. Enter "list partition" and figure out which one is the recovery partition. (Mine was 10 GB in size.)
9. Enter "select partition <x>", where <x> is the number of the recovery partition determined in the previous step.
10. Enter "detail partition" to see information about the partition. (This may help you confirm that you have selected the recovery partition.)
11. Enter "active" to make the recovery partition active. (This automatically makes the previously active partition inactive.)
12. Enter "exit" to exit from the diskpart utility.
13. Enter "exit" to exit from the command prompt.
14. Click on Restart. The recovery partition should now boot, allowing you to restore the system to its factory default configuration.
You can use a backup option, to restore from backup. Or to use one of restore points. Start->Accessories->System Tools->Backup. Or you can use the installation CD, then boot up in repair console.
Normally you can go to the recycle bin and select the items you want to recovery and there is a side option to restore those items. ALl you need to do is go directly to your recyle bin and find what you want.
dfault gateway
While chain stores offer a viable option for data recovery, specialty stores are often better suited to get the job done. Data Tech Labs Data Recovery is a great option in Portland, Oregon to restore your lost computer data.
The diplomatic personnel recovery option involves government.
To which recovery operation do you refer?
If one is trying to recover their computer from a crash, the best way is to restart the computer to see if it loads. If this does not work, one may consider booting in safe mode and using the system restore option. Should this not work, one would need to either reformat the computer or take it to a local computer repair shop.
Click start, type " Backup and restore " . Click " Backup and restore" open the backup and restore window and you will be able to see the option. you can choose the option that best suits you.
This is a simple matter if you had your information backed up to an external online resource. You will want to boot your computer and then a basic startup screen will appear. You can then choose system restore. The computer will revert to a restore point that you hopefully had set. You can then contact the online storage and get your files back.
It would depend on the severity of the prolapse and the method of repair. Assuming your doctor hasn't told you not to attempt a pregnancy (due to the risk of further damage) and you've had an adequate recovery, post repair, then pregnancy still should be an option.
Back up you data of course then reformatt the hard drive via windows disc make sure you have a windows key if you running windows vista then go to the system recovery it should be in the system restore option its a small blue option that read system recovery it will take you back to the original shipped software and you can put whatever name in you want
Default Gateway