How do you rewire ignition keys on a pocket bike?

Answer 1

power the switch without power of switch pos with led from batt then use extra switch once started to switch to 3 point relay switch that allows arc pos to link neg daht to the cct and begin the cycle of yxyxz energy flow

ex .....

when energy connects to pos to pos there is a spark right? so pos to neg there is xz as yxzz is neg to yyz there of yyx is poz to zzx in there of xyz is xy yx to zz

meaning : this

when you have xy yx to z you get xz yz there of pos and yy xx there of neg

So, the ex is this 1 connect z the pos to z then y to pos and x to the first neg with out there being xy connect... 2 the xy connect needs a breaker... 3 the zyx connect must be at all time connected except when the energy is used it must move to the second position which is yzx without losing the energy processed to both connections "the key turn, switch had a magnet in it that does this ..." you can do this with using 2 switches. 3 first stitch is on or off the second switch is acc on off this pushes the energy required to keep the battery running to the ground ... like the magnet. so when the switch is giving both negs to the ground which is yx or xy in case zxy of yx or xy there of x or y the terminal is feeding both the ground of the llights or engine to the positive side of the moto start ,,, which makes the engine stall because the motor tries to spin both diredtion even tho the gas explosed to make it start. so x then y then xz of xy to the process of xzy yzx ending in xx zy xz yzx to xyz of the ground... four of three.

no magnet 2 switches turn one on then the next off and the remove the first pos xx of xzy to get x y z