You use a special round concertina-like plug with a nut on top.
The laundry waste pipe is fitted to the main drain near the toilet and the main pipe down the line past toilet is partly plugged, forcing the laundry waste up the toilet waste tube. You need to auger the pipe from toilet to outside. If all the piping is in ground you will have to remove toilet from floor to do this properly.
Installing a new toilet flange is a fairly simple process that should take no more than 15 to 20 minutes. A properly installed toilet flange will ensure years of dependable use. If the old flange needs to be removed, this will increase the installation time. These instructions assume you are starting with a waste pipe that does not have a toilet flanged installed. If the old toilet flange is still installed on the waste pipe, begin by removing it, then following these procedures.The following items are needed to complete this procedure:New toilet flangeAdjustable wrenchScrewdriver (Phillips or straight head)Hacksaw (if modification to waste pipe is needed)Purple primer and solvent cement (if PVC flange is installed)New wax seal or waxless toilet sealPlace the new flange on the waste pipe and ensure the pipe height is proper for the flange to be affixed to the subfloor. If modifications need to be made to the waste pipe, use a hacksaw to cut the pipe to the proper height.Ensure the new flange is sitting level to the floor. The flange must sit level and flush to the floor for the toilet to properly seal to the new flange.Install the new flange on the waste pipe with the bolts positioned so they will fit into the toilet mounts. If a PVC flange is used, apply purple primer to the outside of the waste pipe and solvent cement to the inside of the flange, then press the flange firmly on the waste pipe. Be aware, once these item are attach using primer and solvent, they cannot be removed or adjusted. Be sure the flange is positioned and inserted properly on the waste pipe.Secure the new flange to the subfloor by screwing the flange directly into the floor.Apply the new wax seal to the flange or affix a new waxless toilet seal directly to the underside of the toilet.A waxless seal is commonly overlooked by consumers. Ask your retailer about a waxless seal. Waxless seals are cleaner to install and uninstall and can be reused even if the toilet is removed later.Mount the toilet back onto the new flange and secure it using a washer and nut on the flange bolts. Tighten each bolt with an adjustable wrench. Be very careful not to over tighten the bolts. If the bolts are over tightened, the porcelain toilet will crack.Your new toilet flange is installed and ready to use.
No, Saddles are illegal in most civilized countries
You CAN'T have a p-trap under the toilet! The p-trap is built into the toilet!
The easiest solution would be to move the toilet so that it lines up with the waste pipe.
6 foot
The trap is built into the toilet itself, you shouldn't put one in the drain.
No, it has to be vented
Hire a plumber! or you could replace the seal inside
Soil pipes and waste pipes differ in their purpose and the type of waste they handle. A soil pipe is designed to carry human waste and toilet paper from toilets to the sewer system or septic tank. A waste pipe, on the other hand, is designed to carry other types of waste, such as water from sinks, showers, and washing machines. Waste pipes can also carry food waste and other debris from garbage disposals. Additionally, waste pipes are typically smaller in diameter than soil pipes.
Any vent is usually the size of the drain or waste pipe it is connected to. 3 or 4 inch on a toilet.
It is adviseable to do so. The seal is pressed into shape after the toilet is installed, if the seal is reused it may not seal because the seal has already been compressed.