0
The gaps found between most tile work are called grout lines. After the tile was set those voids or gaps should have been grouted. Luckily it is never too late to apply the grout. You can get a small box of tile grout from any hardware shore. It's real easy to apply. Just follow the instructions on the box.
Wiki User
∙ 12y ago
Wiki User
∙ 14y agoYou don't ever have to re-apply grout, unless there are visible cracks in the grout or chunks of grout that have actually fallen out. You can re-grout these areas. Use a hand held grout saw (preferred)or a flat head screw driver to score the area of grout that is cracked or missing, then you can re-grout these areas. If it is a bathroom tile, it is most likely a NON-SANDED grout, and you mix it up to a stiff, creamy consistancy. Spread it over the areas, pressing it into the cracks with a grout float or your finger. Try to pass the sponge at an angle over the vertical or horizontal lines of grout, this prevents the grout from coming back off. Wait for the grout to become dry enough that you can gently pass a grouting sponge over the grout without wiping it completely off. After the new grout has set and is pretty much dry, you buff the area with a dry cloth. If the grout is smooth and pretty much flush with the files, grouting is a waste of time. It would have to be such a thin layer that it will eventually flake off.
Some people apply a SEALER every year or so, and this prevents water from penetrating the grout and getting behind the tiles, possibly damaging the walls.
The sealer is applied with a bruch or an applicator bottle, and you just squeeze it onto the lines of grout, wait for it to soak in, and wipe off excess on the ceramic tiles, as it won't oak into the tile itself.
Oh gosh...This is'nt what you asked.
.__.
Sorry,my bad.
Wiki User
∙ 14y agoBrush or sponge it on and wait, if it dries, do it again. If it doesn't, your done. wipe up whatever left over.
Add your answer:
Earn +20 pts
If using floor tile on a shower wall do you have to seal it?
As long as it is not natural stone only the grout must be sealed.
What tools are needed to install shower units?
There are many tools needed to install shower units. There needs to be a grout tray to help lay the tile, screw driver to install the shower head and a caulking gun to seal off the seal.
Do you need to seal fully vitrified glazed porcelain tiles using in the shower and laundry arear?
Seldom any need to seal any tile, certainly not Vitrified, what you will still want to seal is the grout..
How long do you need to wait before using your shower after it has been tiled and grouted?
you can use it right after the grout dries (usually at least a day). . .let the grout cure for at least 30 days before you seal it though when you use the shower before the grout is cured, make sure you don't leave any standing water
tile and grout cleaning?
form_title=tile and grout cleaning form_header=11813 Describe the kind of service you are looking for.*= () Clean / Seal grout or tile () Stone or marble polishing () Replace or repair grout Give the type of surface that is involved?*= [] Kitchen [] Bathroom [] Countertops [] Backsplash [] Tub / shower or surrounding area [] Walls [] Floors [] Outdoors
When do you seal tile grout?
After you have tiled, normally you will add the bonding liquid or sealant to the grout mixture. however there are liquids on the market that you can spray onto the tiles to seal the grout, however this is a temporary and not a recommended idea. It is better to scrap all the old grout out and re-grout with the proper mixture
How do you clean engine oil from grout in tile?
if your grout had not been seal then it will be hard to clean and if you clean with acid the grout will be change color.
Grout Cleaning?
form_title=Grout Cleaning form_header=11823 Describe the kind of service you are looking for.*= () Clean / Seal grout or tile () Stone or marble polishing () Replace or repair grout Give the type of surface that is involved?*= [] Kitchen [] Bathroom [] Countertops [] Backsplash [] Tub / shower or surrounding area [] Walls [] Floors [] Outdoors
Do you seal tile before you grout?
It depends on the type of tile you have. If the tile is unglazed and porous (as mostly all travertine is) then you will need to seal the tile before you grout it so that the grout does not soak into the tile and cause it to become dull. Follow the manufacturers recommendation for the tile that you have.
How can you renew white grout?
You can try to clean it with bleach or a special grout cleaner. White grout tends to turn yellow with time. You may want to dig out some of the grout and put new over it. Then be sure to seal the grout - an ongoing process.
Do you seal travertine tile before you grout?
It depends on the type of tile you have. If the tile is unglazed and porous (as mostly all travertine is) then you will need to seal the tile before you grout it so that the grout does not soak into the tile and cause it to become dull. Follow the manufacturers recommendation for the tile that you have.
How do you seal new vinyl flooring?
vinyl is impervious to liquid and does not need any sealing.
