BY Product Specification
Temperature: Thermocouple, RTD, Temperture Transmitter. Flow Transmitter, DP ransmitter, Pressure Transmitter, Pressure switch, Radar level Transmitter, PLC system, Woodward Governor, Ultrasonic flow transmitter. Relay, Control Valve, ON/OFF valve.
Dp= rho * g * Dh Dp = differential pressure between point 1 and point 2 [Pa] rho = density of the liquid [kg/m3] g = gravity accelaration [m/s2] Dh= height from point 1 to point 2 [m] For typical everyday sizes of rho and Dh, it can be easily seen than Dp is in the range of 1 to 50 kPa (10 to 500 mabr)
I refer to Steam Boiler drum level. It is actually - to some positive figure is the range. Generally the boiler level is maintained at mid point that is zero. The transmistter is differential type. (DP type) If the transmitter is with a specified signal out put of 4-20 mA, it sends out 4 mA at lowest level and 20 mA at highest level. At mid level zero it sends out 12 mA. Differential pressure is highest at actual lowest level and lowest at actual highest level of the drum. By keeping negative to positive range there is fair amount of analog signal on lower and higher side of the drum.
It is used to transmit music. This is an example of such a device http://www.amazon.com/Universal-USB-Stereo-Audio-Transmitter/dp/B000CMM5G8
Dear Freind, If you are talking about hotwell in power plant application, then it is always recommended to use displacer or Radar type level transmitter. DP type LT is not recommended since it could malfunction in vacuume condition.
It is the pipe which connects upstream and downstream pressure across orifice(constrictions) to the DP Transmitter.
Wet legs are used on differential pressure measurement where both sides are filled with liquid. Exception is level measurement in a pressurised vessel (boilers). Dry legs are used where the low side is exposed to atmosphere using a DP transmitter for level measurement in a open tank.
Try this before anything: 1) On the Tascam main menu, select "Wave." 2) On the Wave menu, select "Export Master." This saves your mastered song to the correct folder. 3) Connect the Tascam DP-01 to your computer. You will get a message telling you your USB device has malfunctioned. 4) On the Tascam menu, select "Disk." 5) On the Disk menu, select "USB OPN/CLS." Your computer should detect the DP-01 as a hard drive & be visible in "My Computer" on Windows. The DP-01FX/CD is no longer being made. It was replaced by the DP-02. The DP-02 is compatible with Vista. Here is more info on the DP-02: http://www.bluegrasscenter.com/dp-02_portastudio.html Good Luck~
An fm transmitter mp3 usb allows you to play your digital music in your car. You do not have to listen to the music on the radio but you can put songs on the transmitter so that songs on your mp3 player can be played in your car. Go to http://www.amazon.com/Car-MP3-Transmitter-Drive-Remote/dp/B000O3PLYS for examples of transmitters.
Yes, there are FM transmitters that play mp3s and have USB ports. A search on Amazon.com reveals one that costs only $29.00. It also includes an auxiliary input and a remote. An example of the transmitter can be found here: http://www.amazon.com/Wireless-Transmitter-Auxiliary-Input-Remote/dp/B000FCI7KS
Yes, there are multiple listings on Amazon for auto fm transmitters. You can type 'auto fm transmitters' in the search bar on the site or you can find links such as this on a regular Google search: http://www.amazon.com/Griffin-iTrip-Transmitter-Charger-Black/dp/B000BWACX2
it's depends on sensor output.If it's current or voltage it send through transmission line.if it's pressure it trasmit with dp cell..it's a pressure transmitter...