With water. PETE has a greater density than water where HDPE has a density less than water
Mylar is a British trade name for BoPET(Biaxially-oriented polyethylene terephthalate) a strong polyester film used in packaging, insulation and many other applications.
Polyethylene terephthalate (sometimes written poly(ethylene terephthalate), commonly abbreviated PET, PETE, or the obsolete PETP or PET-P, is a thermoplastic polymer resin of the polyester family and is used in synthetic fibers; beverage, food and other liquid containers; thermoforming applications; and engineering resins often in combination with glass fiber. Depending on its processing and thermal history, polyethylene terephthalate may exist both as an amorphous (transparent) and as a semi-crystalline polymer. The semicrystalline material might appear transparent (particle size < 500 nm) or opaque and white (particle size up to a few microns) depending on its crystal structure and particle size.
Polyethylene terephthalate (sometimes written poly(ethylene terephthalate)), commonly abbreviated PET, PETE, or the obsolete PETP or PET-P), is a thermoplastic polymer resin of the polyester family and is used in synthetic fibers; beverage, food and other liquid containers; thermoforming applications; and engineering resins often in combination with glass fiber. Hope that helps (y) :)
There are many type of plastic available for food boxes, below mentioned is the list of Polyethylene terephthalate (PET or PETE) - GOOD to use High density polyethylene (HDPE) - GOOD to use Polyvinyl chloride (V or PVC) - BAD Low-density polyethylene (LDPE) - OK Polypropylene (PP) - OK Polystyrene (PS) - BAD Other (usually polycarbonate) - BAD For detailed help you can talk to TheCustomBoxes and find the detailed answer.
Types of plastic - polyethylene (HDPE or LDPE) found in plastic bags and shampoo bottles - polystyrene (PS) found in computer cases - polypropylene (PP) found in dishwasher safe containers - polyethylene terephthalate (PET) found in soda bottles - polyvinyl chloride (PVC) More generally speaking in engineering, plastics are divided into thermoplastic plastics and thermoset plastics These are based on their properties upon reheating after the plastic is molded. Thermoplastic plastics when heated will melt whereas thermoset plastics will not melt but only burn This is due to the way the branches of polymers coordinate. Thermoplastic plastics governed by largely van der waals forces. Thermoset plastics are crosslinked by covalent bonds
The seven types of plastic are: Polyethylene terephthalate, High-density polyethylene, Polyvinyl chloride, Low-density polyethylene, polypropylene, Polystyrene, and an unnamed category consisting of plastics that do not fit into the other categories. Polystyrene is often called Styrofoam.
It refers to the type of plastic. 1 = polyethylene terephthalate (PET or PETE) 2 = high density polyethylene (HDPE) 3 = polyvinyl chloride (PVC) 4 = low density polyethylene (LDPE) 5 = polypropylene (PP) 6 = polystyrene (PS) 7 = Other
Mylar is a British trade name for BoPET(Biaxially-oriented polyethylene terephthalate) a strong polyester film used in packaging, insulation and many other applications.
Polyethylene terephthalate (sometimes written poly(ethylene terephthalate), commonly abbreviated PET, PETE, or the obsolete PETP or PET-P, is a thermoplastic polymer resin of the polyester family and is used in synthetic fibers; beverage, food and other liquid containers; thermoforming applications; and engineering resins often in combination with glass fiber. Depending on its processing and thermal history, polyethylene terephthalate may exist both as an amorphous (transparent) and as a semi-crystalline polymer. The semicrystalline material might appear transparent (particle size < 500 nm) or opaque and white (particle size up to a few microns) depending on its crystal structure and particle size.
Polyethylene terephthalate (PET) or other synthetic fibers.
Polyethylene terephthalate (sometimes written poly(ethylene terephthalate)), commonly abbreviated PET, PETE, or the obsolete PETP or PET-P), is a thermoplastic polymer resin of the polyester family and is used in synthetic fibers; beverage, food and other liquid containers; thermoforming applications; and engineering resins often in combination with glass fiber. Hope that helps (y) :)
There are many type of plastic available for food boxes, below mentioned is the list of Polyethylene terephthalate (PET or PETE) - GOOD to use High density polyethylene (HDPE) - GOOD to use Polyvinyl chloride (V or PVC) - BAD Low-density polyethylene (LDPE) - OK Polypropylene (PP) - OK Polystyrene (PS) - BAD Other (usually polycarbonate) - BAD For detailed help you can talk to TheCustomBoxes and find the detailed answer.
Yes, alcohol can react with certain types of plastic. Some plastics, such as polyethylene terephthalate (PET) and high-density polyethylene (HDPE), are resistant to alcohol and do not interact with it. However, other types of plastic, such as polyvinyl chloride (PVC) and polystyrene (PS), can be sensitive to alcohol and may degrade or become brittle over time when exposed to it. It is important to consider the type of plastic that is being used when storing or coming into contact with alcohol.
It is a brand name for "biaxially-oriented polyethylene terephthalate (boPET) polyester film" - in other words, a specific type of non-stick plastic designed to be used in hot environments (like a domestic oven).
Types of plastic - polyethylene (HDPE or LDPE) found in plastic bags and shampoo bottles - polystyrene (PS) found in computer cases - polypropylene (PP) found in dishwasher safe containers - polyethylene terephthalate (PET) found in soda bottles - polyvinyl chloride (PVC) More generally speaking in engineering, plastics are divided into thermoplastic plastics and thermoset plastics These are based on their properties upon reheating after the plastic is molded. Thermoplastic plastics when heated will melt whereas thermoset plastics will not melt but only burn This is due to the way the branches of polymers coordinate. Thermoplastic plastics governed by largely van der waals forces. Thermoset plastics are crosslinked by covalent bonds
The number a person is looking for on a plastic container is located inside the triangle. If you didn't know, the number indicates the type of plastic material used to make that specific bottle. There are varies types of materials 1-7. 1 - PET, polyethlyene terephthalate 2 - HDPE, high-density polyethylene 3 - PVC, polyvinyl chloride 4 - LDPE, low-density polyethylene 5 - PP, polypropylene 6 - PS/PS-E, polystyrene / expanded polystyrene 7 - OTHER, resins or multi-materials
Plastic is a generic term. There are a variety of different forms of plastics.Some include:Polyester (PES)Polyethylene terephthalate (PET)Polyethylene (PE)High-density polyethylene (HDPE)Polyvinyl chloride (PVC)Polyvinylidene chloride (PVDC)Low-density polyethylene (LDPE)Polypropylene (PP)Polystyrene (PS)High impact polystyrene (HIPS)Polyamides (PA) (Nylons)Acrylonitrile butadiene styrene (ABS)Polyethylene/Acrylonitrile Butadiene Styrene (PE/ABS)Polycarbonate (PC)Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS)Polyurethanes (PU)Melamine formaldehyde (MF)Plastarch materialPhenolics (PF) or phenol formaldehydesPolyetheretherketone (PEEK)Polyetherimide (PEI)Polylactic acid (PLA)Polymethyl methacrylate (PMMA)Polytetrafluoroethylene (PTFE)Urea-formaldehyde (UF)You will need to be more specific, unless someone out there would like to research these twenty-five and all other forms of plastic and their market values.