0
by using the seperating techniques first you seperate it from the sand by filtration then you use a seperatin funnel and pour the filtrarte (the liquid in this case the gasoline and water) in this the liquid with higher density will sink (the gasoline) and you open the tap till almost al the liquid of higher density is out
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
How can you separate a mixture of sand and alum?
If the mixture is passed quickly through a magnetic field, eddy currents are formed in the moving metal and cause a small electric field that pulls the aluminum into the magnet. The problem is that once the metal stops moving, it ceases being attracted and then falls down.
How do you separate a mixture of sand sodium chloride and barium chloride?
first, add water to the mixture, barium chloride is soluble in water. then filter through and funnel and filter funnel. then add sodium sulphate, using the stove they will expand and separate. ( sodium cloride, and sand
What are some different methods for separating the parts of a mixture?
It really depends what the mixture consists of. You would not use the same method to separate sand from gravel as you would to separate salt water from pure water.Some common separation methods include:Filtration: works best for solids suspended in a liquid (to separate sandy water into dry sand and pure water for example) or for two solids with very different particle sizes (to separate a mixture of sand and gravel).Distillation: works to separate liquids that have different boiling points. This method is used to separate alcohol from water (to make hard liquor) and the essentially the same method is used to take oil from the ground and turn it into petroleum products such as gasoline. Chromatography: used to separate mixtures of liquids based on polarity. Many different types exist, including thin layer chromatography (TLC), gas chromatography (GC), and column chromatography. Extraction:used to separate a mixture of solids based on their solubilities in organic and inorganic phases. Differences in pH can also be used to separate different solids by selectively ionizing one compound, causing it to dissolve more readily in inorganic solution.See the Related Questions to the left for more information.
Gasoline is not solubal in water because gasoline is?
Gasoline is hydrophobic because the molecules are non-polar. Only polar molecules are soluble in water.
How would you separate a mixture of water and ethanol?
By fractional distillation. Heat the mixture gently. As the temperature rises both liquids will evaporate and should be cooled and the condensate collected. The temperature will stabilise at around 78 deg C when all the remaining ethanol will evaporate.What you are left with is pure water. The condensate is mainly ethanol with a small quantity of water. It can be distilled again to increase its purity.
How to separate silicon from sand. What is the system to separate the silicon from sand?
Water and Boiling Water
How do you separate sand and gasoline?
by using the seperating techniques first you seperate it from the sand by filtration then you use a seperatin funnel and pour the filtrarte (the liquid in this case the gasoline and water) in this the liquid with higher density will sink (the gasoline) and you open the tap till almost al the liquid of higher density is out
How To Separate Sand And Water?
Sand and water can be separated by Filtration.
What methods do you think you will use to separate sand from salt?
Add water, separate the water from the sand. Let the water evaporate.
You can seperate sand from water by?
You can separate sand from water by evaporation or by filtration.
Two ways you could separate a mixture of sand and sugar?
to separate the mixture of sand and sugar:- first: you can mix water in it and after mixing you can separate the water and sand. and after that you boil the water until whole water is evaporated and you get sugar and sand separated. second: if difference b/w size of sugar and sand particle you can use met to separate them.
Explain why is water separate from sand?
Water can be separated from sand by decantation or simple filtration.
How do you separate gasoline and water where gasoline forms the upper layer in the mixture?
you can use an instrument called separating funnel to separate this mixture.
How would separate a mixture of sand and water?
get a strainer to get the sand out silly :)
How would you separate a mixture of water sand salt and iron filings into its four components?
In solution, the salt will be dissolved in the water, the sand and iron will settle to the bottom of the container. Separate out the water, evaporate the water and the salt will remain, separate the sand and iron filings with a magnet.
How do you separate sand from water?
You just need to use filter paper. use the filter paper than just pour the water and sand on the filter paper. the sand will go to the filter paper while the water will go straight to the beaker or anything below it. That is how you separate it. To separate sand and water you could pour the mixture through a filter. The water would pass through the filter but the sand would remain on top of the filter. If you didn't need to save the water you could evaporate the water and leave the dry sand behind. Or allow the sand to settle and carefully pour off the water first. Then allow the remaining water to evaporate.
Describe a pocedure that could be used to separate a mixture consisting of sand and salt?
Place the mixture in water and separate the sand from the water if you want the salt. alow the water to evaporate, and you have salt and sand separated.
