To set the clock on a 2007 Mazda 3, turn on the ignition without starting the engine. Press the "Menu" button on the audio system, then use the "Tuning" knob to navigate to the clock settings. Adjust the hours and minutes by turning the knob and press the "Menu" button again to save the changes. Make sure to check if the time format (12-hour or 24-hour) suits your preference.
Hold the clock button in the use the the radio seek button to increase or decreas the time.
To set the clock in a 2002 Mazda MPV, turn the ignition on without starting the engine. Press and hold the "Clock" or "H" button until the hour digits start flashing. Use the "H" button to adjust the hour and the "M" button for the minutes. Once set, press the "Clock" button again to confirm and exit the setting mode.
You will need both hands to set the clock in the 2007 Chrysler 300. Hold the power button in and adjusts the time with the tuning knob.
To set the clock on a 2007 Honda Jazz, start by turning the ignition switch to the "On" position without starting the engine. Press and hold the "Clock" button until the display begins to blink. Use the "H" and "M" buttons to adjust the hours and minutes, respectively. Once the correct time is displayed, press the "Clock" button again to set it.
Press and hold the clock botton. After the beep, both hour and minute values will be blinking. You can then set the clock by pressing the H for hour or M for minute.
get out your owners manual and it will tell you how to do it.
Your owners manual has all the info you need on that.
August 31st, 2007.
How do you set the clock in 2007 equinox..Take it off military time
I found this out through trial and error. Hold the "clock" button down until it starts blinking. Use the "Tune Seek Track" button up for hours, down for minutes to set the clock. Hit the "clock" button again to save the setting.
To set the clock on a 2007 Honda Fit, first turn on the ignition or accessory mode. Press and hold the "Clock" button until the display begins to blink. Use the "H" (hour) and "M" (minute) buttons to adjust the time, then press the "Clock" button again to save the settings. Make sure to set the correct AM or PM as needed.
How to change Mazda 3 Clock settings To set the hour: 1) Put ignition in ACC or ON position 2) Press and hold "CLOCK" until beep sounds and "12 hr/24 hr" is displayed; 3) Press "SET" to select 12 or 24 hours (24 hours is military time) 4) Press "CLOCK" again while the selection is flashing "Hr ADJUST" 5) Press "SET" to select hour 6) Press "CLOCK" when done Do the same to set minutes, but select Minutes in step 4