Hold the clock button in the use the the radio seek button to increase or decreas the time.
To set the clock in a 1999 Mazda B2500 truck, first, turn the ignition to the "On" position without starting the engine. Press the "Clock" or "H" button to set the hour, and use the "M" button to adjust the minutes. Once you have set the correct time, press the "Clock" button again to save the settings. If your model has a digital display, you may need to hold down the buttons for a few seconds to register the changes.
To set the clock in a 2002 Mazda MPV, turn the ignition on without starting the engine. Press and hold the "Clock" or "H" button until the hour digits start flashing. Use the "H" button to adjust the hour and the "M" button for the minutes. Once set, press the "Clock" button again to confirm and exit the setting mode.
To set the time clock in a Mazda CX-9, turn on the vehicle and access the infotainment system. Navigate to the "Settings" menu, then select "Clock." From there, you can adjust the time manually or set it to sync with GPS, depending on your model year. Make sure to save any changes before exiting the menu.
Yes I believe it is a timing chain as i am replacing mine tonite and it was cheap 73.00 Canadian don't forget gasket set
To set the clock on a 1999 Chrysler Sebring Convertible, turn the ignition to the "ON" position without starting the engine. Press the "CLOCK" button on the radio or dashboard, and then use the "H" (hour) and "M" (minute) buttons to adjust the time. Once set, press the "CLOCK" button again to save the changes.
Press and hold the clock botton. After the beep, both hour and minute values will be blinking. You can then set the clock by pressing the H for hour or M for minute.
Not to be smart but there is a little button on the face that says "clock".
How do you set the clock in a 1999 Oldsmobile Alero? I did not receive a book with the car and I really would like to have the right time in my car.
I found this out through trial and error. Hold the "clock" button down until it starts blinking. Use the "Tune Seek Track" button up for hours, down for minutes to set the clock. Hit the "clock" button again to save the setting.
How to change Mazda 3 Clock settings To set the hour: 1) Put ignition in ACC or ON position 2) Press and hold "CLOCK" until beep sounds and "12 hr/24 hr" is displayed; 3) Press "SET" to select 12 or 24 hours (24 hours is military time) 4) Press "CLOCK" again while the selection is flashing "Hr ADJUST" 5) Press "SET" to select hour 6) Press "CLOCK" when done Do the same to set minutes, but select Minutes in step 4
To adjust the overhead clock in a 1999 Dodge Durango SLT, locate the clock adjustment buttons on the overhead console. Press the “H” button to set the hour and the “M” button to set the minutes. Hold the buttons until the desired time is displayed. Ensure to check that the clock is set correctly after adjustments, as it may require minor tweaks.
If your radio has a "clock" button press and hold it while using the up/down tuner( or volume, i forget) button to set the time.