run engine till hot remove vacum pipe from distributor losen 13m bolt at base of distrubator do not remove rotate distrubtor clock wise rpm should increase if you go to far engine will die road test if motor makes pinking sound move dis back tiny bit this is old school method for people that can tell by ear when an engine sounds sweet other method buy a timing light timing marks located through insepetion hole top of gear box remove bung marks on fly wheel Andy m
There is no provision for setting the ignition timing. The timing is set by the computer by way of engine sensors sending signals to it by such things as temperature, load, speed, and intake air.
How do you set the timeing in a golf 3
The distributor is synched to zero degrees with a scan tool.
what timing are you trying to set? the cam timing or the ignition timing?
You have to set the belt timing in the VW Citi Golf 1300 without the markings.
That requires an engine scanner to set the timing.
Ignition timing is automatically set. sorry.
Ignition timing or valve timing?
You can't set it, since there is no distributer. The computer controls it. If you suspect the ignition timing is off, then it could be caused by the computer (ECM) malfunctioning (unlikely) or one of the numerous sensors is faulty and is send the wrong signal to the computer.
how do you set the timing belt on a 1997 ford contour 2.0 4cy
On the newer cars like the Jetta there is no timing adjustment as it is set on the fly y the engine computer in accordance with sensor inputs.
Ignition timing has no adjustment on these bikes.