Goto sorentosite.com full easy instructions there
When trying to reset the kia sorento airbag light you'll need to reset the entire system or purchase a new set of kia airbags The only option is to take your vehicle to the Kia dealer.
To set the timing on a 2004 Kia Sorento, first ensure the engine is at top dead center (TDC) on the compression stroke of cylinder one. Align the timing marks on the crankshaft and camshaft sprockets according to the specifications in the service manual. Once aligned, install the timing belt or chain, ensuring proper tension is applied. Finally, recheck the alignment to confirm that it remains correct after the installation.
To set the timing on a 2003 Kia Sorento with a 3.5L engine, first ensure the engine is at top dead center (TDC) on the compression stroke for cylinder one. Remove the timing belt cover and align the timing marks on the crankshaft and camshaft gears. Once aligned, install the timing belt, making sure it maintains proper tension. Finally, recheck the alignment before reassembling the cover and starting the engine.
To set the timing marks on a 2006 Kia Sorento, first ensure the engine is at top dead center (TDC) on the compression stroke for cylinder one. Align the crankshaft timing mark with the timing cover mark, ensuring the camshaft timing marks are also aligned according to their respective indicators. Use a timing belt or chain installation guide specific to your engine to verify correct positioning. Once everything is aligned, you can proceed with reassembling the engine components.
on a kia sorento 3.5 liter the crank timing mark is on the front of the crank timing gear in is dot shaped punch on the face of the gear with a corresponding mark at 2 oclock on the block clean the gear you should see it
On my 2003 I press the mode/set button once then press and hold the mode/set button again for approx 4 seconds then use the up or down buttons to change the temp setting
How to set the timing mark on kia clarus
It depends on what size tire you are going to put on them. You need to measure your factory tires (or look on the sidewall) and then you subtract 20 from that and if you can find some tires with a profile to fit, you are golden, however, the kia sorento has a solid rear axle which makes for a pretty stiff ride, if you put dubs on it, the smaller tire profile will only make the ride more uncomfortable due to the reduction in pneumatic shock absorption by the smaller profile of the new tire. I would reccommend you spend the money on something better like a set of Cooper Discoverer STTs.
I dont no
how to set timing on a 2006 kia 1.6
There are three tensioner pulleys that are on each set of belts. You have to loosen the nut on the pully first then adjust the bolt that the pulley rides on. One way tightens the belt and the other loosens the belt.
already answered. see: how do you set the timing on 1996 kia sportage ?