first you make sure your float level is set right. you hook up a vacum gauge to a vacum port at the base of the carb.then you screw the screws in the bottom of base in all the way till it is snug then you back them out 1 1/2 complete turns start vehicle and make sure it is warmed up and screw in or out each screw and watch till you have the highest vacum reading with it running good and smooth,you shuold be idleing about 600-800 rpms .if it is a quader jet carb then you will havbe to probably have it rebuilt by someone that knows the tricks to seal the base plugs so they don't leak and cause the truck to run rich.
If it is running on the battery only then that means the alternator is not charging the battery.
1983-1986 Garrett turbo 1987-1988 ihi turbo
yes I just instaled a 1990 in my 1988
Chevrolet Tracker was created in 1988.
buy a new turbo and replace it
300 HP
as long as they are both non-turbo or both turbo.
no
450.00
There were two different engines in the 1988 Supras(MKIII) there was the turbo-charged 7MGTE inline 6 engine, and the N/A 7MGE which was not turbo-charged.
88 to 99 are all the same.
Goto Brickboard.com