mechanically set the timing as follows, 2 cams must be set at 12:00 the crank set at TDC at marks at about 11:00 to 12:00 electronically the base timing is computer controlled and cannot be adjusted, BUT ... say if idle speed is to high then make sure a/c is off,make sure there are no large loads on engine where as the computer is compensating for that.Check for air intake leaks,check for rich condition that the computer is trying to compensate for. your base idle speed on sporatge should be between 770-870.So if idle speed is ok then check your camshaft position sensor,crankshaft position sensor,and of course wiring to ECM. finally your degrees of BTDC @ idle should be 0-12.
already answered. see: how do you set the timing on 1996 kia sportage ?
see 200 kia sportage timing , i also have diagrams .
You cant set the timing it is computer controlled .
needing to know how to do the time belt for a two wheel drive kia sportage.
I dont no
You don't! The computer, crank and cam sensors control timing.
timing is set by the timing marks on the crankshaft,camshaft and timing belt. Send me your e-mail and I'll send you the daigram.
computer, after you have done the manual setting with camshafts and crankshaft.Usually does not need if you get crank and cams right.
GO 2 www.kiatechinfo.com for a FREE web info site.
How to set the timing mark on kia clarus
left one is exhaust and right one intake, set to the cam timing marks, do not forget the crankshaft timing marks too, there are 2 of them also.
how to set timing on a 2006 kia 1.6