Disconnect the plug going to the distributor that has two wores. Start the engine and set the timing to 0� (TDC). Stop the engine, reconnect the plug and the 'puter will handle the timing from there on.
AnswerDisconnect the plug going to the distributor that has two wires. Start the engine and set the timing to 0� (TDC). Stop the engine, reconnect the plug and the 'puter will handle the timing from there on.you turn the distributor and use a timing light
Chevrolet s10 v6 2.8 liter pickup timing degree, how to set the degree
If you have the 3.8L engine, ignition timing is controlled by the computer and cannot be altered without making changes to the computer. If you have the 3.1L engine, which has a distributor, you can set the timing as you would on any engine with a distributor.
The ignition timing on your vehicle is not adjustable. It is set according to driving conditions by the Powertrain Control Module, or PCM. There should be a sticker under the hood with this information.
Turn the Radio off, Push the set button, use the seek and scan buttons to change the time
How do you set the timing on a 2000 Chevy blazer (V6)
well first you have to turn the car on then turn off the radio hit set then you use the scan and seek button to change the time then turn the radio back on and then it is set.
you need to remove the timing cover and make sure the cam is pointed to 3 o clock and the crank gear has a small 0 on the timing gear that has to be pointed at 12 o clock
0 degrees top dead center the computer will advance the timing as needed
In order to set the timing on a 98 Chevy 350 vortex, you have to time with a scan tool that will let you set timing. Or let garage do it
how do you set the timing for a 1997 Chevy 350 5.7 engine
how do i set the timing for a chevy 350 small block?