answersLogoWhite

0

well first you have to turn the car on then turn off the radio hit set then you use the scan and seek button to change the time then turn the radio back on and then it is set.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

How do you set the timing on 1991 Chevy c2500 5.7 liter?

set timing on 1991 c2500 5.7 liter


How do you set ignition timing 1995 Chevy Lumina van?

If you have the 3.8L engine, ignition timing is controlled by the computer and cannot be altered without making changes to the computer. If you have the 3.1L engine, which has a distributor, you can set the timing as you would on any engine with a distributor.


Timing marks set the dist 1991 Chevy?

Wich marks can u use to set it on time if the marks are erased


What is the timing advance on a 1993 Chevy Lumina?

The ignition timing on your vehicle is not adjustable. It is set according to driving conditions by the Powertrain Control Module, or PCM. There should be a sticker under the hood with this information.


How how to set the timing on a 2000 Chevy Blazer?

How do you set the timing on a 2000 Chevy blazer (V6)


What is the BDCT ignition timing degree on a 1991 Chevy Suburban 5.7?

you should set it at 0 degrees btdc


How do you set a timing chain a 1996 Chevy lumina 3.1?

you need to remove the timing cover and make sure the cam is pointed to 3 o clock and the crank gear has a small 0 on the timing gear that has to be pointed at 12 o clock


How do you set the timing on a 1990 Chevy Lumina?

Disconnect the plug going to the distributor that has two wores. Start the engine and set the timing to 0� (TDC). Stop the engine, reconnect the plug and the 'puter will handle the timing from there on.AnswerDisconnect the plug going to the distributor that has two wires. Start the engine and set the timing to 0� (TDC). Stop the engine, reconnect the plug and the 'puter will handle the timing from there on.


Where are the timing marks on a 3.1 1991 Chevy Beretta?

On a 1991 Chevy Beretta with a 3.1L engine, the timing marks are located on the harmonic balancer and the timing cover. The harmonic balancer has a series of notches, while the timing cover has a pointer that indicates the correct timing. To set the timing, align the mark on the harmonic balancer with the pointer on the timing cover at the specified timing degrees. Always refer to the vehicle's service manual for specific timing specifications and procedures.


How do you set timing on a 98 Chevy 350 vortex?

In order to set the timing on a 98 Chevy 350 vortex, you have to time with a scan tool that will let you set timing. Or let garage do it


How to set timing on 1991 Ford Escort lx 1.9?

"How to set timing on 1991 ford escort lx 1.9?"


Small Block Chevy 350 timing?

how do i set the timing for a chevy 350 small block?