On GM trucks, you need to look under the glove compartment for the wiring harness. look for a single wire with a brown tracer that has a black connector. This is the electronic timing connector. Start the truck, unplug connector, set the distributor timing at zero, tighten distributor, reconnect wire.
1,8,4,3,6,5,7,2 for V8
Thanks a 1 ton. Nice truck.
Looking for a cooling shrad
form_title=Buy a Used Truck form_header=Save money, but get the features you need by purchasing a used truck. Do you want a short wheel base truck or a long wheel base truck?= () Short () Long What kind of truck are you looking for?= () Quarter Ton () Half Ton () Three Quarter Ton () Full Ton How many miles can be on the truck?=_
If the truck is equipped with a V6 it will most likely have a timing belt. However if it has the 4 cylinder it will have a timing chain.
A pickup truck that is rated to carry 3/4 ton of cargo.
Chevy did not use timing belts on truck engines. T-chain only
It is a heavy duty 3/4 ton truck.
The one ton will have a heavier duty suspension system and axles, and typically is geared lower.
i need timing marks mitshubisi truck 2.4 l
Doesn't have a timing belt.
it has a timing chain NEUTZ
go to your local feed mill and weigh it! my quess 5600# dan
It has a Timing Belt.
timing belt is stupidchain is stronger
No, all truck engines have timing chains.
The best mileage for a three quater ton diesel pickup truck is 15 mph. It will only change if you going on a stopping trip and you don't use a highway on a long trip.
The timing on a 1989 Dodge truck should be set to 10* after unplugging the temperature sensor.
Definitely a timing chain, I checked the parts page on GM
It has a timing chain.
The 2.5 liter has a timing BELT
That truck does not have a timing belt. It has a timing chain that will last the life of the engine.
Timing chain NO belt.
That requires an OBD2 engine scanner to set the timing. You can NO longer use a timing light.