Set the combination: With the lock open, turn the shackle so it is 180 degrees from the locked position and push the shackle down. With the shackle pushed down, change the combination. When done, release the shackle so it pops pack up.
To lock, push the shackle into the hole and turn the dials.
In order to open any combination lock you need to know the correct combination, set each wheel of the lock so that the correct combination of numbers are visible in a line and the lock will then pop open when triggered.
In order to open any combination lock you need to know the correct combination, set each wheel of the lock so that the correct combination of numbers are visible in a line and the lock will then pop open when triggered.
If you know the combination, dial it in, then close the lock, then press and hold the "reset" button. Whatever number you set before releasing the "reset" button will be the new combination.
From the samonsite website faq's Set / Reset 3-dial combination lock How do I set / reset my Samsonite or American Tourister 3-dial combination lock? Setting Your Samsonite or American Tourister 3-dial Combination Lock: 1. Remove the red packing arrow on the lock if your case has one. 2. The case is set to 0-0-0 at the factory. Choose your own 3 digits which you can easily recall (birthday, address, etc.). 3. Locate the button or lever adjacent to the dials: -If there is a button, push it towards the dial and hold while you rotate the dials to your desired setting, then release the button. - If there is a lever, move the lever to its lower position (some move to the right and up), rotate the dials to your desired setting, then return the lever to its original position. Your combination is now set to your 3-digit code.
I have a samsonite esteem luggage set. The label indicates that is was made in 1992. It is a dark brocade pattern.
Reset instructions for Samsonite TSA approved luggage lock (TSA002) Step 1. Use the default lock code 000 to unlock. Step 2. Turn the locking loop 90 degrees left with the dial numbers facing you. Step 3. Push and hold the locking loop down. Step 4. While holding the locking loop down against the internal spring reset the 3 digit code. Step 5. Release the locking loop. Step 6. Don't forget the new lock code. Step 7. Set locking loop into locked position and change the three digit numbers. Step 8. Lock should be locked. Step 9. Unlock- enter you new three digit code to unlock. L.G. Wall
maximum of 1000 combinations (10X10X10). Work with one lock and set it to read 000 . Count upward to 1000 by "ones". As you turn combination dial up with one hand, test if lock opens with other hand. Takes about 5 minutes and hopefully both locks are same combination.
If you have forgotten the code to your suitcase's combination lock, you can either use a hammer and screwdriver to disengage the latch, or if you have an immense amount of patience, you can set the dials to 0-0-0 and increment them, one digit at a time, until the lock opens. If you are quick and agile, you may be able to open the lock in ten to twenty minutes, however, if it is a four or five digit lock, it might take you several days to a week.
Menu, Setting security keypad lock Auto lock on-off Set lock You're set. Puch menu and * to lock or unlock
On the side of the lock, you will see a small button. Use the end of a pen and push it in, set the lock to the numbers you want then push up on the lock release. The lock is now set.
With cable inserted, lock code on current code or factory code 000, if you haven't changed it, turn the lock up diane down. The button on the bottom is oval. Put your fingernails on both ends, and life the button away from the lock housing, and turn it 90 degrees. Set your new code. Return the button housing back to its original position. Push button in all the way to release the cable. Should be all ready to go.
Samsonite and Heys both have a nice piece set so that the luggage matches.