0
How do you set the valves on a1641cc Volks Wagon engine and what do you set them at exhaust and intake?
Wiki User
∙ 14y ago
pull off distributor cap then make sure the distributor is pointing at cylinder 1 and at the same time make sure the sharp v mark on the pulley is lined up with crank case then pull off valve cover gasket and adjust both intake and exhaust to 6 thousandths then crank the pulley on the alternator with spark plug wrench 180 degrees and this will put you at cylinder 2 and adjust cylinder 2 at six thousandths and continue another 180 degrees to cylinder 3 on the other side of engine then to 4 when you accomplish this for the first time you will feel really really good
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
How do you tell the differ beween the intake and the exhaust valve when adjusting on a350 engine 1988 corvette?
The intake valves are in the intake ports, the exhaust valves are in the exhaust ports.
Which valves are the intake and exhaust on a 20r engine?
the intake are next to the carb and the exhaust are next to the exhaust manafold intake are .008 exhaust are .012 with the engine warm good luck
Which are the intake valves and which are exhaust valves on 2002 Chevy Silverado 1500 2wd 5.3l engine?
The exhaust valves are smaller and lead to the exhaust manifold.
How can the inlet and exhaust valve be identified on an assembled engine?
On a fully assembled engine, the intake and exhaust valves will not be visible. If the cylinder head is removed from the engine, the valves will then be visible. The intake valve faces are usually larger than those of the exhaust valves, and can be easily distinguished visually.
Trying to set the set valves on 350 which valve is the intake and which is the exhaust you have found tdc and set the 1 valves now what?
The intake valves line up with the intake runners on the intake manifold. The exhaust valves line up with the exhaust runners on the exhaust manifold or headers. With #1 at tdc you can set 1,2,5,7 intake and 1,3,4,8 exhaust valves. Rotate the engine one revolution to #6 tdc and set the remaining valves.
What is Exhaust and intake valve?
As an air/fuel mixture is drawn into the intake ports, intake valves open to allow the mixture to enter the cylinder. On the exhaust stroke of an engine, the exhaust valves open, allowing the burned air/fuel mixture to exit out the exhaust ports. Intake valves are larger than exhaust valves, and are able to be found on the "cold" or intake side of the cylinder head(s).
Is the Plymouth voyager 2.4L dohc an interference engine?
The intake valves can hit the exhaust valves.
Where are the intake and exhaust valves on a 3.4L Chevrolet engine?
Mounted in the heads.
What is and e valve?
There are two types of valves in an engine. The valves are located in the head. There are exhaust valves and fuel intake valves
What is a intake cam?
In a dual overhead cam (DOHC, twin cam, etc.) engine, the intake cam is the camshaft contolling the intake valves. Thus the opperation of the exhaust valves is left to the exhaust cam.
Should the intake and exhaust valves be close when the?
Yes the intake and exhaust valves have to be close.
How do identify the intake and exhaust valves with the heads on the car?
Trace the runners. You can see the exhaust runners leading to the exhaust valves, and the intake runners leading to the intake valves.
