you must first have a timing light. you can buy them at any auto parts store. hook the cable to your first sparkplug wire on your block, #1, also one to the negative battery port, then look infront of your block where the biggest pulley is on your block, and behind it you will shine the light down there and see the timing mark, while the engine is running, and the chart on front of block. once u find it, you must loosen the distrubutor cap and rotate it in either direction to advance the timing or retard the timing. watch a video too for extra help :)
The 1984 Chevrolet pickup truck with the 454 engine produced around 230-240 horsepower.
where are the timing marks on a 1984 mazda b-2000 pickup?
Timing gun
no 84 and 85 swap out.
Should be 8 to 10 degrees before TDC
5.7L 350
Timing light. The instructions are on the engine hood.
The correct timing for a Chevrolet 454 engine made in 1984 is 4 degrees before top dead center with the idle speed set at 600 Rpm's, the distributor vacuum hose disconnected and plugged, and all accessories like the A/C turned off.
On the papers mine said 3200kg, so I think roughly 7000lbs.
It is most likely a straight 6
A 11/16 socket is needed to remove the 1984 Chevrolet pickup front axle hub assembly. The socket should be a five-point socket.
yes