Want this question answered?
u need a torque rench with your injector torque settings, they are on the side of the head built in in the 2.5 tds isuzu engine
You can adjust the injection pump on your 3406 Caterpillar engine by turning the adjustment screw on the top of the fuel pump. The adjustment screw controls how much fuel the pump sense to the engine.
You will have to give a clue. Engine, year etc.
The degrees of injection pump timing of nissan straight six diesel engine is 90 degrees.
on a petrol frontera the pump is part of the sender unit and is located inside the petrol tank. On a diesel however the fuel is sucked forward by the ddeisel pump attached to the passenger side of the engine below the alternater. hope this is helpful. tyretech
If you are asking, "Is there a fuel injection pump in an internal combustion engine with fuel injection?". then the answer would be Yes, it is the fuel pump itself. If that is not your question then please rephrase your question and try again.
injection pump crankshaft camp
It will have a lift pump (may be on engine or in the tank) and an injection pump.
Both the lift pump and injection pump are on the left side of the engine.
The Fuel Pump Relay is at position 3 in the engine bay relay plate
sixty degrees
Unless you are talking about the 6.4 Powerstroke then they dont have a injection pump. However on a 6.4 the injection pump is in the drivers side engine compartment. to replace the pump the cab must be lifted off the frame of the truck. It is a complicated procedure and should only be performed by trained proffesionals.