Want this question answered?
The bolts that come from the drain and run to to toilet help to alaign proper drainage and seal the toilet. You do not want to do the bolts set in cement idea...
what is the price on desert storm pro set
Maximum distance of the toilet to the drain is 6 metres (20 feet). The angle of drop is set by the branch at 112 1/2o, which equates to about 1/4" of drop per foot.
The set is called a Jordan M. set
The set is called a Jordan M. set
Storm Boy, by Colin Thiele, was set in the Coorong of South Australia.
If you have pipe already in the floor sticking up, you get a toilet ring and screw it down to the concrete with anchors. The blue Tapcon work well for this if you have them where you are at. The ring can be PVC, brass or steel, it doesn't really matter. Install the ring and cut the pipe flush with the surface of the ring. If the drain is PVC, you can chisel out some around the pipe and glue the flange on to the pipe, but you still need to anchor it down. If you are pouring a new floor or running a new drain, use PVC and leave a foot or so above grade when you pour the cement. Then follow the steps above. The flange does not have to be attached to the pipe, the wax ring will seal the toilet to the pipe.
First isolate the area that needs repair and drain it. If it is only a hole in a PVC water pipe Get a piece of pipe the same size and cut it in half along the length. Clean both the pool pipe with the hole in it and the new piece of pipe with primer then put PVC solvent cement on both the patch and the pipe and hold it firmly in place until the solvent cement has set, To save you having to hold it in place you can get one or two hose clamps to do the job for you. If a large section of pipe needs replacement, cut out the damaged pipe and replace with similar pipe and connectors.
the storm fighter
Why did Camp David set off a storm of protest in the Arab world?
achieve it target
the romans