0
The only way the clutch pedal will slow you down is if you're going uphill. If you're trying to downshift, the only difference between what you describe and doing it without the clutch is the clutch itself - when shifting one of these trucks, you either double clutch or you float (don't use the clutch).
As you're braking, you wait until the tach gets down to 1000 RPMs (if you plan on dropping just one gear) or 700 RPM (if you plan on dropping two gears). You push on the clutch (only enough to engage it - you don't go all the way down with it), and take the vehicle out of gear, then you release the clutch. Once you've done this, you bump the accelerator to 1500 RPMs, push in on the clutch again, go into the gear you want to downshift to, then release the clutch again.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
How do you get past level 22 obstacle 2 on Tractor Mania?
when you hit the top dont pull the front of the tractor straight down wait till the trailer comes down a bit (pretty much take it slow
What is the difference between clutch control and coasting?
Is clutch control using the accelerator and simultaneously using the clutch to control the speed of the car and coasting is when your car is still moving but your foot is off the gas peddle completely but you're of the clutch peddle to slow down????
How fast should a tractor trailer vehicle be driven when backing?
As slow as possible. You should never be on the high end of the reverse gear, and the motor should be at idle as you're backing.
1996 Chevrolet 3500 truck 454 engine and when I pull a trailer on the highway the clutch pedal gets a lot of slack in it but it will come back when I slow down to 50mph?
does the car seem to loose power when the pedal has slack in it. sounds like you have a worn out clutch that is slipping. this needs to be replaced or adjusted
Why is your lawn tractor is slow to turn over?
weak battery?
Slow acceleration 1995 tercel?
The clutch may be slipping
How to Drive a Tractor?
you work on a farm or on similar land, it can drastically cut down on your workload if you know how to safely operate a tractor. If you don’t have a tractor, it might take you a full day just to mow a field or to transport hay bales. As such, getting a tractor and learning how to drive it can get cut down the grunt work, allowing you to have more time to enjoy the outside world.Make sure you have a tractor that is safe to operate, keeping a close eye on the tire pressure and the attached instruments. Like a regular vehicle, you will want to ensure the radiator, fuel and oil levels are well.Never wear loose clothing if you are going to operate a tractor, such as a scarf. You run the risk of getting your clothing caught in the machinery if you do, and this can have a devastating effect.Your tractor will probably come with a manual that you should read thoroughly before anything else. They will teach you what the different controls mean and how to read the different meters.Double check all of the attached machinery and ensure they are tightly secured to the tractor.Get onto the tractor and adjust everything to your comfort if it can be adjusted, such as the seat and some instruments. Make sure no objects or people are around the tractor for safety purposes.Take off the parking brake, depressing the clutch. When you are ready, start the engine and slowly release the clutch before pressing the gas pedal.Drive cautiously so that you avoid rollovers, and make sure you do not drive onto a slippery slope or into any steep embankments. Overall, drive slowly and drive carefully.When you’re done with the tractor, stop slowly and let it idle for a couple of minutes in order to let the engine cool evenly. Failing to do this can cause the engine to cool improperly, which will shorten its life by drastic levels.Disengage the clutch, engage the parking brake and shut off the engine.
What is The law when Passing a vehicle with a slow Moving Triangle sign In North Carolina?
Where Can You Pass A farm Tractor With a Slow moving TRiangle.
What does it mean when you call a blood an sob?
the yz has a cytrifical clutch and is very slow
Why will a 1999 Geo Metro down shift hard?
Try adjusting the clutch. Never downshift to slow down, press the clutch and use the brake to slow down it will save your engine and clutch. Downshift to pass or to rapidly speed up but be sure to have the revs up higher than when you were in the higher gear.
Motor revs but car car moves very slow?
It's probably the clutch.
What is a tractor?
A piece of farm machinery used to pull implements in fields... (Ex: baler, disc, chisel plow, hay rake, forage wagons... Many more). A tractor is a vehicle specifically designed to deliver a high tractive effort (or torque) at slow speeds, for the purposes of hauling a trailer or machinery used in agriculture or construction.
