Yes as long as you use an approved splice, such as a wire-nut.
Yes, you splice a small length of 16 gauge wire to 18 gauge wire for a repair.
The electrical code states that any splice in a wire, the insulation over the splice has to be equal to or greater than the insulation on that of the rest of the wire. So what ever type of splice that you use make sure that you insulate it well.
The electrical splice and joint types are the Western Union splice, tap joint or splice, fixture joint or splice, and the rattail joint. The splices and joints are used to connect two pieces of wires to carry an electrical signal or current.
No. When you splice a ground it needs to be made by accepted means and the splice must be inspectable. Covering the splice with tape prevents inspection.
One splice that would work is a western splice.
Yes as long as you use an approved splice, such as a wire-nut.
The numbers are 122, 123, 124 as well as 121, 123, 125.
123
A wire splice is the joining of two or more wires together. Commonly this is done with an approved wire joining nut. All slices are to be made in junction boxes to prevent fire should the wire splice become unserviceable.
Yes, you splice a small length of 16 gauge wire to 18 gauge wire for a repair.
123
rat tail splice western union splice
ummm possibly 122 + 1? :\
Splice uses stranded wires while joint uses solid wire.
122 and 123
The electrical code states that any splice in a wire, the insulation over the splice has to be equal to or greater than the insulation on that of the rest of the wire. So what ever type of splice that you use make sure that you insulate it well.