0
Start the lanyard with a lanyard hook and cross over your two strings. Keep weaving by making two loops (doing this by flipping two strings of the same color over to the opposite side) then take the other two strings and make them skip over the first loop (from their "perspective") and then through the second loop (also from their "perspective") until you want to end it and tie it A lanyard string is a flat string that you can weave to make designs. The process, while relatively simple, can be used to create quite complex patterns and designs. The best way to learn is to find someone to teach you. Often Scouts and Boatswain Mates know how to do it.
Wiki User
∙ 14y ago
Wiki User
∙ 14y agoIf you know how to box braid then all you have to do is put your finger on the middle of the string (make sure your string is even!) and do a regular box braid and tighten it. That's how you start a Lanyard!?!?
Wiki User
∙ 12y agowell first you are going to need string. you can get it at michaels or Walmart or hobby lobby. hobby lobby is the cheapest. next you will need 2 different pieces of string it can be the same color or different. different would be recommended. at first it will be difficult to get the strings going in the right direction. the hardest part is the beginning but then it gets easy. i would suggest going to YouTube and looking up how to make a lanyard and it will show you a play by play
HEY! heres how to do it:
1:get two pieces of gimp
2:make an X with the gimp
3:take the bottom piece and drag it over the top string then take the other side of the bottom and do the same
4:then take your string without the loops and do over under-over under with both sides of the string
Wiki User
∙ 14y agoWhen you click on the link which has been provided for you beneath this answer you will be directed to an excellent webpage that has full instructions for making your own lanyard including how to finish.
http://www.boondoggleman.com/prj_completion.htm
I've always just tied it off at the end.
Wiki User
∙ 14y agoThe easiest way is to make the first kind I ever learned. You start with two long peices of lanyard string. You can choose any two colors. If you want to clip it to something, I suggest you get a clip that you can fasten to it. Use the two strings as one two start. Put them through the clip, and tie them. Then If you know how to do a lanyard stitch, then you can do the rest. To do a stitch, you fold two ends over (of the same color), Then weave one string through them, then the other. Just over one string for each. Over, under. The first stitch is often hardest. The rest is easier though! I hope you enjoy this, and i hope i helped!
Wiki User
∙ 9y agoA person can finish a lanyard by tying the strings into a tight knot. This insures that that lanyard will not come apart and if beads are present, they will not fall off.
Wiki User
∙ 11y agoA three-string lanyards starts with a regular knot.
Wiki User
∙ 16y agoyou tie it together
Add your answer:
Earn +20 pts
I don't know how to put a usb on a lanyard?
If your flash drive has a indent or a loop somewhere, just tie the end of the lanyard (usually the thinnest part where the clip goes) through, and thread the other end through the center of the loop of the lanyard where you threaded the thread through the flash drive.
How do you finish a circle lanyard?
You can either burn it with a fire only the end though. Or you can tie it it into a knot.
Can you attach a lanyard to a Nokia Lumia 520?
No, there is no lanyard hole on the phone body. Alternatively, you can purchase protective case and attach a lanyard to it.
What is the name of the plastic string used to make lanyard's?
lanyard string
What is the record for longest lanyard braid?
The record for the longest lanyard braid is held by Julia Stater from Massachusetts, USA, who braided a lanyard that measured 9,129 feet long in 2006.
Why is a lanyard called a lanyard?
In the 1980, there was a country which no longer exists called Lafrica. This country had a way of preventing STI's by using a rope with a hook attached on the end by inserting it into the affected area and hooking out any diseases. This later caught on into different countries as they renamed it into a 'Lanyard' in relation to 'Lafrica', although it's purpose in now different e.g. holding I'D's, whistles and keys.
How a pulley is used to raise a flag?
Two snap hooks are fastened to the loop of lanyard that runs through the pulley. The flag is fastened to the lanyard with the hooks, and the lanyard is pulled through the pulley at the top to raise the flag.
Who invented the lanyard?
Erick wenz
How do you make lanyard heart?
be smart!
Who would a customized lanyard be a great gift for?
A customized lanyard is a great gift for employees. It's useful and promotes the name of the company.
Where can one find more information about custom lanyards?
If you are looking to purchase a custom made lanyard, there are a few places you can check out. Websites such as Lanyard Labs, Custom Lanyards To Go, and 4imprint offer services to make a custom lanyard.
Did the royal engineers take the royal artillaery lanyard?
No. The Royal Engineers adopted their lanyard in the 1950's to "brighten up their battledress". The tall tales about them being awarded an Artillery lanyard are just that, tall tales and leg pulling.
