normally digital watch can turn off alarm and hourly beeping. The best way is to find the guide on your user manual. If you don't have a user manual. Try to press 2 buttons at same time for a while.
I have an ATHM4801 model and on that one you press and hold button 4 ('Reset' on the lower right), while holding button 4 press button 2 ('Mode' on the lower left). If all the days are visible when you press button 4 then the hourly chime is on. If the days are not displayed then the chime is off.
I have the AW21300W, which has 4 buttons:Light (Top left)Mode (Bottom Left)Start/Stop (Top Right)Lap/Reset (Bottom right)If you want the chime on, press button 4 and hold while you press button 2. When all the days show, the chime is on.
Use the same procedures as for the ATHM4801 model listed below:press and hold button 4 ('Reset' on the lower right), while holding button 4press button 2 ('Mode' on the lower left).
Hello friends! I faced the same problem at first as I didn't know the options in the watch. To set the hourly chime in Sonata super fiber watch all you have to do is- Just press the mode option & go to alarm. Now press the start/stop button for once. This will set the hourly chime with the icon darkened besides the alarm symbol. Hope this would help you! Manish kumar E-mail : manu.budh@india.com
you press the mode button until you get to the alarm mode, then you press the start stop button repeatedly until the little CH symbol at the bottom of your watch face disappears, this will deactivate the hourly chime.
I have the AW21312W, which has 4 buttons:Light (Top left)Mode (Bottom Left)Start/Stop (Top Right)Lap/Reset (Bottom right)To turn the set alarm off, push buttons 3 and 4 at the same time, the alarm icon should appear or disappear To turn off the hourly chime, press button 4. While holding it down, press button 2 and the days of the week disappear. The chime is now off. If you want the chime, press button 4 and hold while you press button 2. When all the days show, the chime is on.On my digital watch you first need to press 2 until the alarm time is shown. There should be icons to show if the alarm is on and if it's chiming the hour. To change these hold down 3 then press 2 to switch through the different possibilities, ie just alarm on, just hour chime on, or both on or off.* On the AW60458W sport watch, turn off the hourly chime by staying in CLK (normal) mode, holding down the LAP/RESET button to display the alarm time, and pressing the MODE (left side) button. When the hourly chime is on, all 7 days of the week appear selected. Otherwise it is off. Pressing the MODE button toggles this function on and off.
Hit it with a hammer.
On most watches, you go into the 'Alarm' settings screen, then push one of the buttons to cycle through the alarm modes.
Hold the mode button down until setting changes to alarm and starts flashing. Press the mode button again to switch to time. Use the SPL/Reset and ST/STOP buttons to change the time and switch between the seconds, minutes, hours, date, month, day. Press the mode button again to make it stop flashing. And your time should be set.
Hold down the reset button and then press the mode button to either turn the chime on or off. Indicator lights should go off/on around days of week.
I have the 750Li In i-drive go to settings/clock and de-select memo and you're done.
Hourly chime on/Off: 1.) Press and hold the lap/reset button (bottom right) to display alarm time 2.) While holding lap/reset button, press the mode button (bottom left) 3.) If the all the day of week indicators our lit, beep is on. If they are all off, beep is off. Alarm On/Off: A press of the lap/reset button (labeled) will show the alarm time, Unpress will show the time of day. Press again toshow the alarm time. Press and hold the lap/reset button will show the alarm time again, but it will hold there. While holding this lap/reset button, press the start/stop button (labeled). This will turn on (or off) the alarm (tiny indicator). Press this start/stop button repeatedly (while still holding the lap/reset button and you will see the indicator turning on and off with each press. Stop this button pressing with the indicator OFF, let up on the lap/reset button, and the time will return to the screen. The alarm will now be OFF.