Remove the old filter. Replace it with a new filter. Before installing the new filter wipe the mounting surface clean and apply a coat of oil to the new oil filter's gasket. Spin on the filter and tighten it 3/4 turn after it makes contact with the mounting surface. No, more and no less. If you still see oil leaking from the filter then look above the filter for the leak. Possibly valve cover is leaking.
First U check ABOVE the filter 2 b sure the intake manifold & Valve covers aren't Leaking.. then U check 2 c if the mounting surface is flat & the threaded connector is tight & if that doesn't work U might need a new filter If after checking above, the filter, as Marv pointed out, you find that it is indeed the filter that is leaking, replace the filter. Clean the mounting surface throughly, oil the filter gasket, and tighten the filter 3/4 turn after it touches the mounting surface. No more, no less! A leaking filter is almost always caused by incorrect installation.
It fits a Honda cb700sc Nighthawk motorbike, 1984-86
I believe that is where your fuel filter is located.
The voltage on a 1984 Honda Shadow is 12 volt.
what is a 1984 Honda cr60 worth today
pull drain plug on bottom of crankcase. remove filter. Replace new filter. replace drain plug. fill oil to given line. simple.
How to you syncronize a 1984 honda prelude carburator?
the PVC valve is by the condigulam and to find that you need to eat crap
A seal, or hose is leaking or you have a cracked carb. Check the fuel filter and make sure it's not loose or cross threaded.
Kinetic Honda was created in 1984.
How to set timing on 1984 Honda 200s 3wheeler
How to replace a fuel filter on a 1984 Chevy S-10