Simply tighten still it becomes harder to do so, then stop. Most threading isn't designed to be overtightened and has a cut off point where you're doing more damage to it than you should be.
For tightening and loosening screws.
Tightening or loosening screws.
In romanian, "surub" [Shurub] means "screw". Not to "screw somebody", but like in "tightening the screws"
you would have to do it manually by either loosening or tightening the stop screw on the throtle plate, it will take several times until it compensates
35
It depends if you are loosening it or tightening it.
something is loose like a screw needs tightening get it fixed before it brakes
it stops you from getting to many r.p.ms turning your engine and over heating it.
Well, it CAN be wrapped either way, but because standard screws tighten when turned clockwise:if the wire is wrapped around the screw clockwise tightening the screw will pull the wire tighter around the screwif the wire is wrapped around the screw counterclockwise tightening the screw will push the wire away from the screw making it loose and maybe even popping the wire out from under the screwSo, if you want the wire to stay secure on the screw only wrap it clockwise!
What does the stop motion screw do on the sewing machine
Tightening a screw, or a nut and bolt. Walking up a hill.
The verb for tight is tighten.Other verbs are tightens, tightening and tightened.Some example sentences are:"I will tighten the rope"."He tightens the knot"."I am tightening the screw"."His grip on the ball tightened".