answersLogoWhite

0


Best Answer

Assuming the tank is fitted with a 'normal' float valve you can do a temporary fix by making the float apply more pressure on the seal.<br><br>Assuming the arm to which the ball float is attached, this can be achieved by holding one hand in the middle of the arm and one hand on the float. Now push the ball down while resisting the middle of the arm with the other hand. This will bend the arm slightly making the float lower in the water.<br><br>This is only a temporary fix and might not work at all if the seal is split.<br><br>The whole valve and float unit can be bought at a local shop for the price of a couple of beers and takes 10-15 minutes to change with only minimal simple tools needed.<br><br>YOU MUST TURN THE INCOMING WATER SUPPLY OFF BEFORE STARTING THE REPLACEMENT.<br><br>Once the incoming supplu is isolated, turn a couple of cold water taps on to relieve any pressure in the system.<br><br>Hope this helps.<br>

User Avatar

Wiki User

14y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

13y ago

Replace flapper or check fill valve for problem.

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you stop water constantly running in tank?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Why does the toilet bowl fill but the tank does not?

Sounds like the flap that allows water to enter the bowl from the tank, isn't sealing. If this is true, the water will be constantly running.


How do you stop rust in a steel water tank?

don't put water in a tank


Why is the boiler underneath the hot water storage tank?

So the steam can rise from the boiler to the hot water tank storage


How do you stop the toilet tank from leaking water even after replacing the flapper valve?

adjust the floating bulb, it may be running over the top of the overflow pipe


Should you keep your tank filter on all day?

Yes. Water in a tank should be filtered constantly, day and night, to achieve optimal water quality.


Can a running toilet effect the hot water heater?

Usually not. If toilet has a mixing valve going to it so warm water fills toilet tank and toilet runs constantly, then enough warm water could leak out through toilet to possibly have an effect on water heater.


My Car is running rough after running out of gas?

You have exhausted fuel from tank? Try to change fuel filter if fitted. Possible contaminant was in tank (water, solids) Try a cup of metholated spirit in tank water will be displaced or fuel filter for solids.


You are on a well you installed a 100 gal hot water heater ever since you constantly loose pressure and the water stops- what is causing this?

SEVERELY oversized hot water tank for the pump and holding tank to handle


Gallon per inch of a tropical fish?

1 inch of fish needs at least 1 gallon of water. Every tank needs a cycled filter running permanently. Every tank needs at least 50% of its water changed every week. They are the Basic Minimal requirements. Anything less and I can guarantee that your fish will be constantly getting sick.


Can a mixture of sugar and water poured through your gas tank cause your head gasket to crack?

No, the sugar will not mix with the gasoline but might clog the fuel filter. The water will stop the engine from running but will do no permanent damage and neither will the sugar.


How do you stop a toilet tank condensation?

Install a tempering valve in water line feeding toilet. Tempering valve will mix hot and cold water together so warm water fills toilet tank which will stop condensation.


Where is the toilet washer?

seal to stop water from runing into tank located between tank and bowk