answersLogoWhite

0

Depending on what you mean by wiper slapping, most likely your wiper blades simply need to be replaced. When wipers get old, they get stiff and then they start fighting the glass because they're less flexible. So if you mean the loud clunk at the top or bottom of the cycle or if you mean the chattering/viberating of the blades on the glass, definitely the first thing to do is replace the blades. See sources and related links below for information on wiper sizing.

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

Crv wiper arm removal?

how do you remove the wiper arms on a 2002 CRV?


What size to replace wiper blades in 2002 Honda crv?

honda crv 1997 rear wiper blade should be 11", 13" is too big


Where is the windshield wiper fluid pump on Honda CRV?

The windshield wiper fluid pump on a Honda CRV is found on the drivers side. It is located underneath the wheel well.


Where is the wiper fluid reservoir for the rear wiper on a 2000 Honda crv?

It is the same reservoir for the front and the rear. Suspect a bad pump, or clogged, disconnected, or cracked hoses leading to the rear wiper.


How do you change the rear wiper on a 2009 Honda crv?

The 2009 Honda CRV rear wiper blade size is a special 14" rear wiper blade that is very simple to replace once you find a replacement. Unfortunately, most stores do not stock this special rear wiper blade so please see sources and related links below for more information and installation videos. Once you get the wiper blade, there will also be step-by-step instructions on the packaging.


What size wiper blades do you need for 2010 Honda CRV?

The 2010 Honda CRV wiper blade sizes are 26" drivers side, 17" passenger side and a special 14" rear wiper that is difficult to find in the stores. See sources and related links below for more information. Since there are currently over 22 different wiper arm attachments, do not buy wipers just by length only - be sure to lookup exact wiper blade part numbers by vehicle make, model and year for the brand wiper you decide to purchase. This ensures correct length AND correct attachment.


What size wiper blade do you need for 2011 Honda crv?

The 2011 Honda CRV wiper blade sizes are 26" drivers side, 17" passenger side and a special 14" rear wiper that is difficult to find in the stores. See sources and related links below for more information. Since there are currently over 22 different wiper arm attachments, do not buy wipers just by length only - be sure to lookup exact wiper blade part numbers by vehicle make, model and year for the brand wiper you decide to purchase. This ensures correct length AND correct attachment.


Location of Windshield wiper motor on 2004 Honda CRV?

It is located under the windshield cowl (the plastic cover with the holes in it, directly under the windshield). To expose it - remove the wiper arms, and the retaining nuts on the wiper shafts, then remove the screws holding down the cover.


How do you remove wiper fluid in 2010 crv?

Remove hose from bottom of tank and let it drain. Otherwise, siphen or use turkey baister.


Where is the gas filter on a 97 crv?

It is located fastened to the firewall just about iommeidiately below the hub of the right side windshield wiper arm.


Will camile ever stop slapping nlogan in big time rush?

nope 8D


How do you change 2009 crv wipers blades?

Lift the wiper arm up until it stops. Locate the area where the wiper blade is inserted into the hook and look for a tab or button. Then rotate the wiper blade 90 degrees counter clockwise while pulling wiper blade out of hook. See link below for video.