I don't have your answer, but I have the same problem on a Kawaski 650 TS.
I have had a suggestion ig sliding a long pipe over the bent bar and levering it
back in place. I don't know if that will break it, but it bent one way, should the other.
Also suggested is applying heat to the bend and reshaping.
Mines still bent. If you have fixed yours yet or know how, PLEASE let me know at
bucx@charter.net.
05 Kawasaki Prairie 360 how many quarts of oil
The Kawasaki Prairie 360 4x4 has 15.7 kw/ or about 21 hp. I wish I had one
my cousins kvf 360 tops out at 75km/h
cat costa un cdi de kavasaki 360
25x8-12 front 25x10-12 rear
Top speed on a prarie 360 is 40 mph....A good way to check your speed is a hand held gps...
no the regular tools should get the job done if you know what your doin
The quad takes unleaded gasoline. Kawasaki recommends fuel with an octane rating of 87 or higher. Additionally, use only SAE 10W-40 engine oil and Mobil Fluid 424 or Exxon Hydraulic 560 final gear case oil. Finally, the Prairie 360 takes DOT-4 heavy-duty brake fluid.
under the seat
Another name for SST Rotor is GYro HeadSet, Which Allows You to Spin Your Handlebars 360 degress
Remove side cover, remove clutch ( primary the smaller clutch) and belt will come off easy. Make sure to install new belt with arrow on belt pointing in the right direction (forward)
You don't adjust it. It is controlled by the CDI box. You can likely find ways to disable it or you could also likely find an aftermarket CDI box that will flat out remove it but fhe factory system is not something you adjust.