Have you tried washing the fabric
Micro strip lines,Parallel strip lines,Coplanar strip lines,Shilded strip lines.
It consists of dielctric substrate with a strip conductor on one side and complete conducting layer on the other. It is basically an open structure and requires high dielectric constant substrate to confine the fields near the strip conductor
A bimetallic strip is made of two different metals joined firmly together as the strip is heated one metal expands more then the other the strip is forced to coil more tightly when the strips cools the process rapidly and uncoils again , movements of the strip can operate an electrical switches
Measure the mass (in kilograms) and length (in metres) of the strip. Divide the first by the other.
gay
Applied casing
In sewing, a ruffle is a strip of fabric that is tightly gathered to form a flounce look, usually a feminine and frill trim. Ruffles are generally applied to garments, bedding, or other textiles.
In sewing, a ruffle is a strip of fabric that is tightly gathered to form a flounce look, usually a feminine and frill trim. Ruffles are generally applied to garments, bedding, or other textiles.
With a thin line of eyelash glue.
A slot seam is very simple. First baste a plain seam together. (A plain seam is simply two pieces of fabric sew together. You need to make sure that the seam is at least a half an inch wide.Second, press open the seam along its full length.Third, cut a strip of fabric as long as the entire seam and as wide as the now open seam width. This means it will be twice the width of seam.Fourth, pin or paste the strip of fabric to the opened seam, ensuring that the strip sits directly over the center of the opened seam.Fifth, turn the fabric so that the strip is underneath and you can sew from the 'finished' or right side of the project. Sew a quarter inch on both sides of the seam line.Finally, remove your basting. You have made a slot seam.
No. It is perfectly fine to leave the plastic strip on. The strip is there to keep the shingles from sticking together in the bundle. Try to remove this strip while doing a ten or fifteen square roof and watch your time a frustration rise.
"To strip" is to remove the outer covering, which might be clothes, skin, or topsoil.
panel train
if you are talking about the strips that you put on your forehead it isn't an LCD strip instead there are different thermochromic inks applied to different parts of the strip. when heat is applied to the inks they change colour and with the use of different inks, they change colour at different temperatures because of this, you can see your temperature (: help much?
if you are talking about the strips that you put on your forehead it isn't an LCD strip instead there are different thermochromic inks applied to different parts of the strip. when heat is applied to the inks they change colour and with the use of different inks, they change colour at different temperatures because of this, you can see your temperature (: help much?
A cam border is the plain strip of fabric about one to two inches in from the edge of the towel. A decorated cam border gets a new name: dobby border.
Looking closely at a square of fabric, you will see a thread that runs vertically and a thread that runs horizontally, this is galled the grain of the fabric. Bias cut fabric is fabric that is cut diagonally to the grain. In other words, if you cut off a corner and then cut another strip at the same diagonal, say 2 1/2 inches wide, you will have a bias cut fabric. this strip of fabric can then be folded taking both outer edges toward the center and then folded again in half. It can be used to finish anything from blankets, quilts garments etc. as it is very bendable and pliable because it stretches as a result of being cut on the bias.