Wrap a chain around it, then hook chain to immovable object and take off fast
yes it does
How do you change the door hinge pins and bushings on a 2002 GMC 1500 pickup truck?"
A 1994 is not carburetted. It is fuel injected.
Should be the 4l80e
Remove the plastic cover on the tailgate. There are screws in the top and sides. After that you should have access to the area where you see the lock. You will have to pull a pin to remove the lock and it should fall right out.
remove the panel from the gate (it may be difficult if the gate is still closed). there is a metal panel held w/ screws; remove that panel and the latch will be visible. pull both rods at the same time to unlatch the gate (careful, the space is small and the truck loves to pinch!).
The tailgate latch comes off with the cable. It is one piece.
Under the truck on the drivers side frame rail.
Between the throttle body and the intake manifold.
The sensor is located by the catalytic cnverter on the inlet side.
Hard to answer your question when you don't even list which truck and what engine. Look at the link below and pick the correct truck and engine. http://autorepair.about.com/library/firing_orders/bl-gmc-firing-94.htm
You will find it in the gas tank, and you will have to remove the tank to service it.