You will have to separate the door panel and the crank, then shine a light in and you will see the c-clip that keeps the crank attached to the shaft if you can pry that clip off the lever will pop right off (it is kind of tricky though)
There is a specialized 'GM Window and Door Clip Removal Tool' that will accomplish the task much easier than disassembling the door panel. It can be found in most any auto parts store and is sometimes available as a 'loaner' tool from Autozone outlets.
To test a 1995 Cavalier crank sensor you would need to get a mechanic's computer. They can put a sensor/fuse tester on it and see if it is working properly.
Hey Jeff== It depends on which engine you have but I imagine it is on the module and senses notches on the crankshaft. GoodluckJoe
I need instructions on how to change the window motor in 1995 Chevy Camaro.
Next to the oil filter
No it does not
2.2L Altenator on a 2.2L, AND, 2.4L on a 2.4L ONLY!
A crank sensor was not USED on a 1995 model.
no i can not answer this quiestion
Auto or standard?
valve or rocker clearence for a 1995 chevy 2.2
i don't see why not the 2.2 was used in 95 and 96 should fit right in
Inside the oil pan
its under the intake in the front of the engine
The fuel pump is in the gas tank
The oil sending unit on a 1995 Cavalier is on the passenger side of the engine. It is close to the oil filter, screwed into the block.
You need to get a window crank removal tool from an auto parts store. Simple pressed steel tool for less and $5.
that year did not take one
approx. 15.2 gallons
the power steering reservoir