This sounds like a joke, but sometimes the cap cannot be removed when the engine is hot. It will turn, but just click and not back out, similar to a stock gas cap when its tightened it too far. So let it cool down, and then consider the phrase made famous by the Egyptians during construction of the Pyramids:
"Lefty Loosey, Righty Tighty".
Take the oil cap off of engine and pour in oil.
take the oil cap off on the valve cover and pour in.
No , not for the engine oil cap , just turn it by hand
Turn it counter clockwise.
look for a oil cap that you take off on the valve cover.
you take the cap off the valve cover on the passenger side of truck or the oil breather cap on driver side to add oil
Look on the cap that you take off to fill the oil on the valve cover.The brand will be your choice.
twist it to the left and pull geez
Turn it counter clockwise
on the right side of the bike down almost ontop the motor look for the grey cap then take it off and put in the oil.to take out the oil take off the guard on the bottom and take off the bolt it will drain out:]
The engine turns off when the oil cap is removed because the engine is designed to do so. When the oil cap is removed a vacuum leak is created which causes the engine to turn off.
1)First open your hood, and take off the oil cap. 2)Then go under the car and you'll see the oil pan. It has a big black cap on it that looks like little spokes. That's the oil pan. Remove the oil plug and let the oil drain into a container. 3)Next the big black cap thing, You'll have to remove that, becasue that's where the oil filer is at. Once you have that off take the old filter out and put the new on on. Now to take the oil filter cap off you may need a special tool. Like a oil filter wrench or somther to big enough to grab the cap and twist it off. 4) Put the oild filter cap back on. 5) Put the drain plug back in. 6) Fill the enige with about 5.5 quarts of oil. That's it easy.