I have a CA380 and all you have to do is be sure is unloaded and then put safety in fire position. Near the rear top you should see button that can be pushed in by pencil eraser about 1/4inch. Hold it in and slide the upper portion of the assembly slightly forward and then lift up and slide forward at the same time. It is a little tricky but keep at it till the slide and barrel (all one piece) separate from the frame. To reassemble after cleaning and oiling slightly, reverse the order.
If you have a different model, I have no Idea. However, either go to Cobra Enterprises on line or Google them and I think you can download an owners manual for your model. It will tell you how to care for it and disassemble.
Hope this helps.
pbrady@hughes.net
Yes.
Follow owner's manual instructions. If you don't have one, take it to a gunsmith.
Try to fire it then if it does not fire the firing pin isnt in
Best left to a gunsmith
$129 + tax and $10 for background you can take it home?
no
about $250
Ask a gunsmith for help
Ask a gunsmith for help
No
If you don't have an owner's manual, take it to a gunmsith and ask for help
Go to Cobra Arms web site and check out their videos.