remove the manual locking hub with an Allen wrench. there will be a ring in a recess at the lip of the hub, using a small flat head screwdriver, pry the ring up and pull it out. after that you can pull out the 4x4 hub and you will see the a large nut with 4 notches in it, this requires a special socket to remove. there will be a flat washer with holes cut in it, this will slide out and you will see another larger nut, remove that and you will pull out the wheel bearings with the hub.
Any other 1975-79 Nova front clips would work
If it doesn't now, it did when it came off the assembly line. They were required as of the 1975 model year.
if it is a v8 it should be on the driver side cyl head near front of engine
in 1975 Chevy made more than one v8, of different cid.( cubic inch displacement) first find out the cid. and then get the engine no. which is located on a machined pad in front of the left head. ( left ,standing in front looking at the engine). you have to look up the eng. no. to get it right. your Chevy dealer may look it up for you if they are in a good mood.
National Assembly Building was created in 1975.
1975-76
1975
5x5
Number one on all Chevy V-8's that I know of (However I do not know everything) are located at the driver side very front of vehicle (for engines mounted in the front of the vehicle and that are rear wheel drive) Best of Luck PmTCnCman
350 turbo.
orange
176,376