If this is the hub on the drum, comes off with a 5 lb. hammer.
with "ford radio removal tool"
Take off the old one and put a new one back in that spot.
I want to say no, because the tempo has a bigger transaxle than the escort.
Take off brake caliper and then hit the rotor with a hammer near the wheel bearing to break the seal between the rotor and axle shaft
Have a jack in place break the lug nuts free first. Jack up the car. Take the lugnuts off, take tire off.
The front wheel bearing need to be pressed by a press. Unless you have a press, I suggest you take it to a shop that has one and have them do it. The bearings can be found at autozone, or advance auto cheaper than any garage can find them for.
Take you car in to a mechanic and have the brakes checked.
how to take off wheel hub on ford 94 F350 dual?
Installing wheel bearing in a Ford Festiva is simple but will take some time. All you have to do is take the hub off, take out the tie rod and then take out the wheel bearing from the hub.
First disconnect the negative battery terminal and wait 5 minutes for the air bag to disarm itself. Remove the horn pads from the back of the wheel and take the connnectors off. Then take the horn pad off the wheel by taking out the screws in the back. Now the wheel can come off. It will take a steering wheel puller to get it off. A steering wheel pull can be got at the parts store for a deposit. Before you pull it off put a dab of paint on the shaft so you can put it back in the same position.
According to my Chilton's Auto Repair Manual : For the 1991 Ford Tempo , 2.3 litre four cylinder engine : ( 5.0 US. quarts with engine oil filter change )
Take wheel off, put bearing in