Want this question answered?
Unscrew cap from end of plug chamber .Take your barrel off there will be a little tin cap at the end of your plug barrel take it out to get to your plug
Take the end cap off, unscrew the screw in the handle, take off handle, put exact same new handle on, screw it down, put cap back on.
Lens Cap meaning she forgot to take off the cap to the lens before the picture.
Cut the end of the cap off, about 1/2 inch back from the end and then cut the side of the cap. You should be able to peel the cap off of the pipe. If you have enough pipe, just cut the entire cap off and start with a clean section.
all you should have to do is take the distributor cap off, and there it is. answer take the distributor cap off, pull the old rotor off, put the new one on, put the cap back on.
no
the "end" cap
No you do not.
1.Put in red 2.Put on cap 3.Put in chemical 4.Take cap off 5.Rotate five times 6.Put on cap 7.Put in chemical 8.Take off cap 9.Rotate once 10.Put on cap again 11.Put in chemical 12.Take off cap 13.Rotate twice 14.Put on cap 15.Put in red 16.Put in chemical 17.Take off cap AND YOUR DONE
You have to pop the cap off on the front of the acrylic handle, then under the cap there will be a screw to undo.
it spills
No!