carefully remove vinyl etc forom center of sterring wheel. remove nut. need steering wheel puller to pull it off once nut is removed.
The wheel should lock when you take the key out of the ignition. If it doesn't, there's something wrong.
Personally, what i finally did was drilled two holes and tapped out two threaded holes in aluminum hub then just used my steering wheel puller. Be careful not to hit clockspring while drillingh unless you are throwing it away.
well dude u take the horn cover off and taake all the guts out and then u should see holes in the stering wheel and get a steering wheel puller and pull it off
To take the steering wheel off to get to the horn a person needs a steering wheel puller. It will remove the steering wheel by applying pressure to the middle and pulling up on the rest.
You should take out the Mercedes badge out of the steering wheel. Then you should see a screw inside the steering wheel. Take it out and you're done.
Take the nut of the steering wheel under the horn and use a puller to get it off
take horn button off of the steering wheel and you will see a large nut holding the wheel on, take the nut off and then you will need a steering wheel puller to get the wheel off it's splines.
You are referring to the key and tumbler assembly. It requires special tools to remove the steering wheel and steering lock plate. It also requires a special tool for the installation. It would be cheaper to have a mechanic do it.
pull of thehorn cover then take of the nut and the steering wheel should pull off easy?
You have broken wires in the tilt wheel. You will need to take the steering wheel off and start looking for a broken wire in the steering column somewhere. You will have to have a steering wheel puller to get it off.
You take it off just like any other steering wheel
first take the cover for the horn off. there will be a large nut in the center. take that off. there is also three screws around it. take those off and remove the ring they hold on. take a steering wheel puller and connect it onto the steering wheel. turn the center bolt clockwise until the steering wheel comes off. to reinstall the steering wheel, you just have to press it on by screwing the big nut back on.