Screw driver maybe, depends on what kind of vehicle; some just pop out when you loosen the seal around them.
you'll have to take the plastic moulding off on the inside of your truck adjaysent to your light ther you will find the bulbs or the screws ta take your lens covers off good luck
you can take the tail light out by unscrewing the wing nuts in the trunk, when all wing nuts are off pull the tail light out then take the light bulbs out to replace the tail light.
You have too take off the bumper before you take off the light.
In the trunk directly behind the tail light pull the carpet back and there are three twist off plastic nuts take them off then pull tail light straight out
open your trunk there are two srews on the tail light remove them and take them off.
Take the light assy off.
Well If you unscrew the taillight from the car take it off you can change you tail light bulbs
The tail lights are one piece, the lens does not come off. You remove the assemblies by removing retainers form inside the trunk.
u have to to take the lens off the light
The bulbs screw in from the rear. There are screws holding the light assy on and youhave to take them out to take the light off.
Open the boot, you will see to round covers next to the tail light, pop the off the covers with a flat screwdriver, you will see two 10mm Philips head bolts, remove these bolts, then gently pull the tail light fitting out, it is also held in place with to lugs, so don't twist as the may break, I used a plastic spatula to gently pry off the tail light fitting, once out, find the damaged bulb and replace, by the way the break/Tail light is NOT bayonet style, it's a capless 7443 (aka w7875) Dual Filament Bulb
To take out taillights. unscrew the screw by the light and then inside hatch there is a nut type bolt behind the light unscrew and light will pop off