0
Add your answer:
Earn +20 pts
How do you replace the water pump on a 2000 Ford Explorer?
loosen the bolts on the water pump pull and take off the belt, then take off the pully. take the hoses off then remove the bolts from the water pump and pull it off
Do you take off the timing cover on a mr2 when replacing the water pump?
yes you do i had to take mine off when i replaced my water pump
How do you take off water pump on 2000 Saab 93?
How do you take off the water pump on a 1999 saab 95 se?
How do you replace the water pump on a 1995 Pontiac Grand Am V6?
95 Grand AM V6 water pump is fairly easy. You have to take the serpentine belt off. The water pump pully has 4 bolts in it take them out the pully slides off and there are 4 more bolts that hold the water pump in take those out and the water pump slides out.
How do you replace the water pump on a 1998 Pontiac Transport 3.4L?
Remove battery. Remove left engine brace. Remove serpentine belt. Take off water pump pulley. Take off water pump! This was the easiest water pump I ever replaced.
How do you change a water pump in a 1997 Chevy Lumina and there is a slight spray under the water pump is it leaking?
to change the water pump loosen all the pulley bolts, then take the belt off. after you get the pulley comletely off, there will be 5 more bolts. take them off and the water pump will come off. you might have to tap alittle.
How do you replace the water pump on a 1994 Nissan Sentra?
Not sure on a '94, but on a '90 w/ a 1.6 you just remove the pulley bolts on the water pump, take off the pulley and belt, remove the thermostat housing on the side of the water pump, and then remove the water pump bolts. After that you can take off the water pump.
How do you replace water pump on 1996 2.0L ford contour?
You take it to the shop. You have to take off the timing belt to do the water pump
How do you replace the water pump on a Chevy Camaro?
Answerwell if it is in a 95 you have to take off the coil pack then the power steering pump then take of the bolts on the water pump
How do you replace the water pump on a 1993 Chevy Lumina 3.1L 6 cylinder?
take the belt off by using a 3/8 ratchet and by turning the water pump wheel you have 4 bolts too take off 10 mm ratchet and the water pump is off
How to take the fan clutch off of a 1989 Nissan truck?
It's built into the water pump. You have to replace the water pump.
How do you change a water pump on a 1992 dodge Dakota 5.2L?
Take off your belt. Take off the fan. take off water hoses on pump. Unscrew all bolts on water pump. There are many. Put new pump in the same spot . Put silicone sealer on all of the connecting metal of the new pump. Place the new pump on and bolt it back up again. Wait a while for the silicone to set and dry.
