answersLogoWhite

0

How do you take off the water pump on a 1999 Saab 95 se?

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

How do you replace a water pump on a 2004 Saab 93?

video how to take off step by step water pump and timing chain Saab 93 2004


How do you replace the water pump on a 2000 Ford Explorer?

loosen the bolts on the water pump pull and take off the belt, then take off the pully. take the hoses off then remove the bolts from the water pump and pull it off


Where is the water pump on a 2000 dodge caravan 3.0 V6 engine?

you have to take timing belt cover the water pump work with the belt


How long does it take to replace water pump on 2000 kia sportage?

2 days.


Do you have to remove the timing belt to take off a water pump for a 2000 Dodge Intrepid?

yes sorry


How do you replace the oil pump on a 95 Saab?

the oil pump is on the front of the motor you have to take off the crank pully it is behind it there are two gears that you will need to replace


How do you change water pump 2000 ford ranger 3L?

take out the radiator and fan shroud. remove all pulley brackets. take the fan off of the water pump pulley. the water pump is located at the bottom front of the engine. remove all the bolts... and go back with it in opposite sequence


How long will it take to replace a water pump a 2000 Chrysler Sebring?

At least 5 hours. It is driven by the timing belt.


How do install a water pump on a 1999 Chevy Blazer?

what all i need to take a water pump on a 99 Chevy blazer what all i need to take a water pump on a 99 Chevy blazer what all i need to take a water pump on a 99 Chevy blazer what all i need to take a water pump on a 99 Chevy blazer


How do you replace water pump 2000 vw golf 1.8 T?

buy a vw, chiltons, or haines manual or take it to a garage.


How do you change a water pump on 2000 Kia Sephia?

To change the water pump on a 2000 Kia Sephia, first, disconnect the negative battery terminal and drain the coolant from the radiator. Remove the serpentine belt, then take off the timing belt or any components obstructing access to the water pump. Unscrew the water pump from the engine block, clean the mating surface, and install the new pump with a new gasket. Reassemble in reverse order, refill the coolant, and check for leaks.


How to replace the water pump in a 2003 Jeep Liberty?

Take your old water pump out. Take it down to your local parts store Get a new water pump and then put it in.