If the damage to a wooden stock is truly a dent- meaning the wood fibers are bent, not cut, you may be able to unbend it- as least in part. A common technique is steaming a dent. By adding water to the wood, the fibers expand, and move back towards their original shape. I have used a damp cloth and an electric clothes iron to improve some older military stocks that have had a hard life. Moisten the cloth, wring out excess water, and place cloth over the dented area. Use the iron to iron the cloth above the dent- take your time, shift the cloth as it dries from the heat. This may take several applications over a few days. When finished, let the stock dry for a few days. Wood that has been ironed may have the grain raised, and appear somewhat "fuzzy". After it has thoroughly dried, you may need to sand the area with VERY fine sandpaper or steel wool, and refinish that part of the stock. This may not fully raise a dent, but can make it less noticeable.
Disassemble the gun, and replace the back cap with the stock or take it to a paintball store, and ask them to.
the stock is what you use to hold the weapon by.
you can but it is hard you have to take apart the gun and pull the stock up and close the gun
there are two ways you can take a longstrike stock out the first one is to take apart the gun and remove the stock or you can mod it by filing or sanding down the front grooves of the stock. you can check on how to do this on youtube. hope this helps.
the tf11 only comes with a stock or it doesnt. you can not buy an extra stock for the gun.
Take the butt stock off and look on the edge of reciever where butt stock attaches to. Thats where i found mine.
Mainly in the stock
Estate sale, garage sale, gun shop, pawn shop, gun show, stock shop
Try e-gunparts.com, gun shows, gun shops, custom stock makers.
Try these sources: Numrich gunpartscorp.com Jack First jackfirstgun.com Bob's Gun Shop gun-parts.com
Have you heard about the internet? Start with google Search for Savage 220 A stock then click
It is the end of the stock as opposed to the end of the barrel end of the gun