Want this question answered?
There are two on my 98 marauder. One is directly under the gas tank, the other is under the seat at the back end of the rear engine cyinder. You have to remove the gas tank to get to the front one. Take the side covers off and the battery out to get to the other. If you search online, you can find a vz800 repair manual with details.
It is under the seat. You need to take an Allen wrench take the seat off and you will see it.
R134a
There are 2 bolts (1 on each side) at the back of the seat. Remove these, push down on the front of the seat by gas tank and pull backward.
I need to know also --Just bought one yesterday GS450A AND CANT FIGURE HOW TO GET SEAT OFF.
You can remove the off a Suzuki 230 4 wheeler by locating the mounting bracket on the floor of the vehicle. Once you find that, you can remove the screws in the plate with a Phillips head screw driver, and take the seat out.
Take off the rear seat. Take off the saddle. Battery is under there. Remember to pull off Positive first, then negative. Hope that helps.
just pull up on the bottom front of the rear seat, you'll here the clip disengage. Then pull the seat up & outward.
The bench seat is bolted in. After you take the bolts out you will still have the rolling brackets sticking out but still leaves plenty of room to haul something.
You need to take the back cowling off to get to the "trunk" then take off the seat. under the seat should be the battery, just take off the two screws that hold each terminal on.
There are 8 bolts that will need to be removed from the seat before you can take it out. These bolts are located on the floor of the vehicle and once you have them removed, you can simply pull the whole seat out of the vehicle.
remove the seat and the main bolt is there and look between the handle bars and the tank for the other screw.